I got this weired Error after flips realignment:

2021-02-28T00:15:51 Mount does not support syncing.
2021-02-28T00:15:39 Syncing to RA (10h 02m 07s) DEC ( 69° 53' 52")
2021-02-28T00:15:39 Target is within 01° 20' 08" degrees of solution coordinates.
2021-02-28T00:15:39 Solution coordinates: RA (10h 02m 07s) DEC ( 69° 53' 52") Telescope Coordinates: RA (09h 57m 28s) DEC ( 69° 15' 31")
2021-02-28T00:15:39 Solver completed after 1.01 seconds.
2021-02-28T00:15:37 Image received.
2021-02-28T00:15:34 Capturing image...
2021-02-27T19:58:04 Target is within acceptable range. Astrometric solver is successful.
2021-02-27T19:58:04 Target is within 00° 00' 08" degrees of solution coordinates.
2021-02-27T19:58:04 Solution coordinates: RA (09h 57m 26s) DEC ( 69° 15' 34") Telescope Coordinates: RA (09h 57m 26s) DEC ( 69° 15' 33")
2021-02-27T19:58:04 Solver completed after 0.70 seconds.
2021-02-27T19:58:03 Image received.
2021-02-27T19:58:00 Capturing image...
2021-02-27T19:57:59 Slew complete. Target accuracy is not met, running solver again...
2021-02-27T19:57:58 Slewing to target coordinates: RA (09h 57m 27s) DEC ( 69° 15' 33").
2021-02-27T19:57:58 Syncing to RA (09h 57m 24s) DEC ( 69° 15' 13")
2021-02-27T19:57:58 Target is within 00° 00' 44" degrees of solution coordinates.
2021-02-27T19:57:58 Solution coordinates: RA (09h 57m 24s) DEC ( 69° 15' 13") Telescope Coordinates: RA (09h 57m 28s) DEC ( 69° 15' 33")
2021-02-27T19:57:58 Solver completed after 0.63 seconds.
2021-02-27T19:57:57 Image received.
2021-02-27T19:57:54 Capturing image...
2021-02-27T19:57:53 Slew complete. Target accuracy is not met, running solver again...
2021-02-27T19:57:47 Slewing to target coordinates: RA (09h 57m 27s) DEC ( 69° 15' 33").
2021-02-27T19:57:46 Syncing to RA (09h 53m 32s) DEC ( 68° 53' 43")
2021-02-27T19:57:46 Target is within 01° 02' 39" degrees of solution coordinates.
2021-02-27T19:57:46 Solution coordinates: RA (09h 53m 32s) DEC ( 68° 53' 43") Telescope Coordinates: RA (09h 57m 28s) DEC ( 69° 15' 33")
2021-02-27T19:57:46 WCS information updated. Images captured from this point forward shall have valid WCS.
2021-02-27T19:57:46 Solver completed after 2.01 seconds.
2021-02-27T19:57:44 Image received.
2021-02-27T19:57:41 Capturing image...
2021-02-27T18:37:23 World Coordinate System (WCS) is enabled. CCD rotation must be set either manually in the CCD driver or by solving an image before proceeding to capture any further images, otherwise the WCS information may be invalid.
2021-02-27T18:37:23 Warning! The calculated field of view is out of bounds. Ensure the telescope focal length and camera pixel size are correct.
2021-02-27T18:37:22 World Coordinate System (WCS) is enabled. CCD rotation must be set either manually in the CCD driver or by solving an image before proceeding to capture any further images, otherwise the WCS information may be invalid.
2021-02-27T18:37:21 Idle.


Mount Driver: EQMod with HEQ5 Mount.
The initial alignment worked we'll ...

Any suggestions?
CS
Philip

Hmm, i think the mount did not flip:

... many more entries until this morning
2021-02-28T00:30:15 Telescope hour angle is more than the maximum hour angle of 0.7. Aborting motion...
2021-02-28T00:29:56 Telescope hour angle is more than the maximum hour angle of 0.7. Aborting motion...
2021-02-28T00:29:37 Telescope hour angle is more than the maximum hour angle of 0.7. Aborting motion...
2021-02-28T00:29:17 Telescope hour angle is more than the maximum hour angle of 0.7. Aborting motion...
2021-02-28T00:29:16 Telescope hour angle is more than the maximum hour angle of 0.7. Aborting motion...
2021-02-28T00:28:58 Telescope hour angle is more than the maximum hour angle of 0.7. Aborting motion...
2021-02-28T00:28:57 Telescope hour angle is more than the maximum hour angle of 0.7. Aborting motion...
2021-02-28T00:28:39 Telescope hour angle is more than the maximum hour angle of 0.7. Aborting motion...
2021-02-28T00:28:20 Telescope hour angle is more than the maximum hour angle of 0.7. Aborting motion...
2021-02-28T00:28:01 Telescope hour angle is more than the maximum hour angle of 0.7. Aborting motion...
2021-02-28T00:27:42 Telescope hour angle is more than the maximum hour angle of 0.7. Aborting motion...
2021-02-28T00:27:23 Telescope hour angle is more than the maximum hour angle of 0.7. Aborting motion...
2021-02-28T00:27:21 Telescope hour angle is more than the maximum hour angle of 0.7. Aborting motion...
2021-02-28T00:27:03 Telescope hour angle is more than the maximum hour angle of 0.7. Aborting motion...
2021-02-28T00:26:44 Telescope hour angle is more than the maximum hour angle of 0.7. Aborting motion...
2021-02-28T00:26:39 Telescope hour angle is more than the maximum hour angle of 0.7. Aborting motion...
2021-02-28T00:26:38 Telescope hour angle is more than the maximum hour angle of 0.7. Aborting motion...
2021-02-28T00:15:32 Meridian flip completed.
2021-02-28T00:15:32 Meridian flip completed OK.
2021-02-28T00:14:34 Meridian flip slew started...
2021-02-28T00:14:34 Meridian flip started.
2021-02-28T00:12:05 Meridian flip waiting.
2021-02-27T18:37:21 Telescope info updated successfully.

Weired ... flip and realign worked nice two days ago. Did't changed anything.