×

INDI Library v1.9.6 Released (21 May 2022)

Bi-monthly INDI Library released with new drivers and bug fixes.

Losmandy G11 not connecting to indi driver

  • Posts: 74
  • Thank you received: 8
My mount has been successfully connecting to indi for some time.  This is a new G11.  The client is now crashing everytime I try to connect to the mount.  I have attached log file.  Any help please??   Thanks... Bruce
1 year 1 month ago #71289
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 359
  • Thank you received: 26
Bruce,
I may be wrong, because I am relying on my memory, but is 9600 baud the correct rate?
Paul
Losmandy G11 with Gemini 2 controller
QSI 583/683 monochrome camera with filter wheel
Starlight Xpress Lodestar X2 guide camera
Microtouch Focuser controlled using Arduino UNO emulating Feathertouch controller
Raspberry Pi 2GB with Raspberry Pi OS 32bit
1 year 1 month ago #71291

Please Log in or Create an account to join the conversation.

  • Posts: 806
  • Thank you received: 126
9600 is correct.

"The traditional serial port on your PC (or a USB to RS-232 serial converter) can connect
to Gemini’s serial port #1 to send and receive commands and data using the Gemini
serial protocol. The default port settings for serial port #1 are 9600 baud, no parity, 8
bit words, 1 stop bit (9600,N,8,1). "
1 year 1 month ago #71302

Please Log in or Create an account to join the conversation.

  • Posts: 806
  • Thank you received: 126
I have an old Gemini 1 system so mine is very different from yours. Your logfile says "*** stack smashing detected ***". I have no idea what it means. How did you connect the mount to your computer?
1 year 1 month ago #71304

Please Log in or Create an account to join the conversation.

  • Posts: 74
  • Thank you received: 8
I have found the problem. I use Pegasus ultimate power hub. It seems the hub has developed a problem with indi driver and Kstars dated after November of last year. Loaded a older version and problem went away.... Bruce
1 year 1 month ago #71378

Please Log in or Create an account to join the conversation.

Time to create page: 0.580 seconds