×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Losmandy G11 not connecting to indi driver

  • Posts: 83
  • Thank you received: 9
My mount has been successfully connecting to indi for some time.  This is a new G11.  The client is now crashing everytime I try to connect to the mount.  I have attached log file.  Any help please??   Thanks... Bruce
2 years 10 months ago #71289
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 437
  • Thank you received: 31
Bruce,
I may be wrong, because I am relying on my memory, but is 9600 baud the correct rate?
Paul
2 years 10 months ago #71291

Please Log in or Create an account to join the conversation.

  • Posts: 984
  • Thank you received: 160
9600 is correct.

"The traditional serial port on your PC (or a USB to RS-232 serial converter) can connect
to Gemini’s serial port #1 to send and receive commands and data using the Gemini
serial protocol. The default port settings for serial port #1 are 9600 baud, no parity, 8
bit words, 1 stop bit (9600,N,8,1). "
2 years 10 months ago #71302

Please Log in or Create an account to join the conversation.

  • Posts: 984
  • Thank you received: 160
I have an old Gemini 1 system so mine is very different from yours. Your logfile says "*** stack smashing detected ***". I have no idea what it means. How did you connect the mount to your computer?
2 years 10 months ago #71304

Please Log in or Create an account to join the conversation.

  • Posts: 83
  • Thank you received: 9
I have found the problem. I use Pegasus ultimate power hub. It seems the hub has developed a problem with indi driver and Kstars dated after November of last year. Loaded a older version and problem went away.... Bruce
2 years 10 months ago #71378

Please Log in or Create an account to join the conversation.

Time to create page: 0.557 seconds