×

INDI Library v1.9.3 Released (11 Nov 2021)

Bimonthly Stable INDI Library release introduces new drivers and fixes for existing ones. Some highlights:

Exposures aborted by exceeding the limits are still saved

  • Posts: 8
  • Thank you received: 0
Hi everyone, my mount does not have a perfect guide, so I set the limits for the deviation to abort the shot, the problem is that when for example I set an exposure to 300 seconds, it stops at 30 seconds, the image it is saved anyway.
So I have to go and erase them by hand every time.Is there a way to not save the aborted exposures?
Skywatcher 150/750
Svbony 60/240
Zwo Asi 294 mc pro
Zwo Asi 120
EQ5
Zwo EAF 5v
Optolong l-enhance
svbony cls
1 month 2 weeks ago #76612

Please Log in or Create an account to join the conversation.

  • Posts: 326
  • Thank you received: 24
Roberto,

Whenever cloud or other things happen I have the capture restart and I have never seen it save the incomplete capture and I don't see any good reason to allow this, so there is no setting I am aware of.

You should provide some logs to show what is happening.

Paul
Losmandy G11 with Gemini 2 controller
QSI 583/683 monochrome camera with filter wheel
Starlight Xpress Lodestar X2 guide camera
Microtouch Focuser controlled using Arduino UNO emulating Feathertouch controller
Raspberry Pi 2GB with Raspberry Pi OS 32bit
1 month 2 weeks ago #76614

Please Log in or Create an account to join the conversation.

  • Posts: 8
  • Thank you received: 0
In fact it seemed like a nonsense thing to me, I noticed that saving does it 1 time out of 3 that the exposure is blocked and it also happens that the exposure timer starts to display numbers at random only to stabilize after a full exposure.
Now I have no logs available, but I will enable them for the next session and post them here, thanks.
Skywatcher 150/750
Svbony 60/240
Zwo Asi 294 mc pro
Zwo Asi 120
EQ5
Zwo EAF 5v
Optolong l-enhance
svbony cls
1 month 2 weeks ago #76618

Please Log in or Create an account to join the conversation.

  • Posts: 509
  • Thank you received: 102
I know this was looked at recently. What versions of kstars and INDI are you running?
12" pier with HDX110 using EQMod
ASI 1600 mono/color mains with ASI290MM in off-axis
ASI filter wheel
Moonlite focusers for the sharpening
AT115EDT w/.8x for the light
Fedora Linux, 100% INDI
1 month 2 weeks ago #76629

Please Log in or Create an account to join the conversation.

  • Posts: 8
  • Thank you received: 0
Kstars Version 3.5.2 Stable
Indi 1.9.2
Skywatcher 150/750
Svbony 60/240
Zwo Asi 294 mc pro
Zwo Asi 120
EQ5
Zwo EAF 5v
Optolong l-enhance
svbony cls
1 month 2 weeks ago #76633

Please Log in or Create an account to join the conversation.

  • Posts: 509
  • Thank you received: 102
indilib.org/forum/development/10346-asi-...age-after-abort.html

This is the thread where it was discussed. You did not say what your camera was, but the fix was in the ASI driver in indi-3rdparty. It should have been in 1.9.2 though, so perhaps this is something different.

What is your equipment? You may want to set up a signature to help with debugging. Here is how: indilib.org/forum/new-forum-users/8195-w...ndi-forum.html#63061
12" pier with HDX110 using EQMod
ASI 1600 mono/color mains with ASI290MM in off-axis
ASI filter wheel
Moonlite focusers for the sharpening
AT115EDT w/.8x for the light
Fedora Linux, 100% INDI
1 month 2 weeks ago #76634

Please Log in or Create an account to join the conversation.

  • Posts: 8
  • Thank you received: 0
I updated the signature to show my gear i also updated kstar to the latest version right now, tonight i will try again and hope it doesn't happen
Skywatcher 150/750
Svbony 60/240
Zwo Asi 294 mc pro
Zwo Asi 120
EQ5
Zwo EAF 5v
Optolong l-enhance
svbony cls
1 month 2 weeks ago #76635

Please Log in or Create an account to join the conversation.

Time to create page: 0.612 seconds