×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Camera temperature stuck when building new dark masters

  • Posts: 225
  • Thank you received: 16
I've used the dark master builder function in the past and it has worked well.  Today, I decided to rebuild my dark library... but ran into a problem.  With my ZWO 183MC Pro, I set the camera temperature at -10C.  When I tried to build new darks, EKOS kept changing the value to 0C.  I checked my defaults and it is set at -10C and I manually entered -10C in the camera tab.  Regardless, it keeps changing it back to 0C when I start the build.

Thanks,

Ron
Last edit: 2 years 4 months ago by Ron Clanton.
2 years 4 months ago #77941

Please Log in or Create an account to join the conversation.

  • Posts: 225
  • Thank you received: 16
Is there nobody else having this issue? It seems that I can only build flats/master flats at 0c.  I didn't have this problem in prior versions.

Thanks,

Ron
Last edit: 2 years 4 months ago by Ron Clanton.
2 years 4 months ago #78121

Please Log in or Create an account to join the conversation.

  • Posts: 985
  • Thank you received: 160
Hi Ron,

I just tested with my ASI294Pro. I was unable to reproduce your issue. This is a screenshot of what it did look like here:

 

Two things I could think of:
1. Are you sure you selected the Pro cam in the pulldown menu?
2. The first temperature value must be lower than the second one. If the first one is set to 0 you can not set the second to anything lower than 0.
The following user(s) said Thank You: Ron Clanton
Last edit: 2 years 4 months ago by Alfred.
2 years 4 months ago #78139
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 225
  • Thank you received: 16
ooohhh... I was sooo stupid.  I didn't see the "T. Range" in the setup.  I was trying to set in the capture tab.  Wow... I'm getting old.

Problem solved!

Thanks so much!

Ron
2 years 4 months ago #78142

Please Log in or Create an account to join the conversation.

Time to create page: 0.264 seconds