×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Stellarmate 1.7 Beta

  • Posts: 401
  • Thank you received: 41

Replied by Euripides on topic Stellarmate 1.7 Beta

Hello Jasem, 

I'm not sure if it needs anything more than that

<code>sudo apt-get install indi-asi-power</code>

but I get the same message: Unable to locate package 




It works great
 
The following user(s) said Thank You: Shawn Fields
Last edit: 2 years 1 month ago by Euripides.
2 years 1 month ago #80143

Please Log in or Create an account to join the conversation.

Replied by Jasem Mutlaq on topic Stellarmate 1.7 Beta

did you run sudo apt-get update?
2 years 1 month ago #80157

Please Log in or Create an account to join the conversation.

  • Posts: 401
  • Thank you received: 41

Replied by Euripides on topic Stellarmate 1.7 Beta

My bad!

It works just fine, thank you!
2 years 1 month ago #80159

Please Log in or Create an account to join the conversation.

  • Posts: 147
  • Thank you received: 12

Replied by Chris Madson on topic Stellarmate 1.7 Beta

After reading about & trying to upgrade... you're better off downloading the beta and wiping your settings.

Good advice Jasem,
2 years 1 month ago #80202

Please Log in or Create an account to join the conversation.

  • Posts: 147
  • Thank you received: 12
I'm full up on 1.7. Michel made install scripts for MW4 to run on it and they're posted on his github. One thing I had to do manually was use sudo apt-get install astrometry.net. For some reason I couldn't locate the executable to run. ASTAP CLI doesn't work; despite putting it in the directory it just doesn't solve.  However, if you install the full version, that works.

I could use all the features (capture/guide/scheduler/kstars). Drivers tested were 10u, ZWO (asi2600MC), and QHY462C.

Thanks,
Chris
Last edit: 2 years 1 month ago by Chris Madson.
2 years 1 month ago #80299

Please Log in or Create an account to join the conversation.

  • Posts: 147
  • Thank you received: 12

Replied by Chris Madson on topic Stellarmate 1.7 Beta

Is there a way to fix this?

N: Skipping acquire of configured file 'main/binary-armhf/Packages' as repository 'ppa.stellarmate.com/repos/apt/stable bullseye InRelease' doesn't support architecture 'armhf'
2 years 1 month ago #80565

Please Log in or Create an account to join the conversation.

Replied by Jasem Mutlaq on topic Stellarmate 1.7 Beta

You can safely ignore it. I don't know what's exactly causing this.
The following user(s) said Thank You: Chris Madson
2 years 1 month ago #80584

Please Log in or Create an account to join the conversation.

  • Posts: 66
  • Thank you received: 2

Replied by Richard Wesson on topic Beta issues

Hasve updated to the Beta. However, when I boot up I now get the message:
Error authentication with ekos live server. Connection refused.

I dont connect to ekos live anyway - when I go to ekoslive on the control panel it is configured to autoconnect, but if I deselect this and restart this does not stay deselected! More worrying when I got to the control panel, it will not connect stating:

localhost refused to connect.

This is not helpful to say the least....I am not now in a position to be able to install the stable relase.... It will also not connect to the app
2 years 1 month ago #80697

Please Log in or Create an account to join the conversation.

  • Posts: 147
  • Thank you received: 12

Replied by Chris Madson on topic Beta issues

I was messing with that today too. I had to go to online and use my username and password... the 'offline' said I wasn't registered with the server.
2 years 1 month ago #80703

Please Log in or Create an account to join the conversation.

  • Posts: 66
  • Thank you received: 2

Replied by Richard Wesson on topic Beta issues

My issue is not that I cannot connect to Ekos live, I do not want to and I have no use for it. Rather, it is the first error message that pops up when i start up. I then find that although the adapters (wifi internal plus dongle and ethernet ) are shown as connected, I have no internet connectivity, despite being shown as connected to my home router.

If I open the web browser, then go to the control panel, I get 'this site cannot be reached' with 'localhost refused to connect.' The address bar shows http://localhost:3000/#/home. This means I cannot revert to a stable vversion from this damned beta that has screwed up the whole system!

Going back to ekos live - if I access it in ekos, it shows as offline which as I stated does not bother me as I have no use for it. However, the autostart box is ticked - even if I unticck it, next time I start up it is ticked. What is the point of that?

Can somebody please tell me how to revert back to the stabe version so I can use the thing again?
2 years 1 month ago #80708

Please Log in or Create an account to join the conversation.

  • Posts: 147
  • Thank you received: 12

Replied by Chris Madson on topic Beta issues

I think the easiest way is to download the 1.6.2 image and reflash.
2 years 1 month ago #80712

Please Log in or Create an account to join the conversation.

  • Posts: 66
  • Thank you received: 2

Replied by Richard Wesson on topic Beta issues

I was afraid that might be the case and I would lose all of my settings.
2 years 1 month ago #80715

Please Log in or Create an account to join the conversation.

Time to create page: 1.105 seconds