×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

1.7 64bit - ASI120mm-mini not seen

  • Posts: 3
  • Thank you received: 0
I recently upgraded my Rpi4 to the 8GB version so I decided to give 64bit Stellarmate a try. No matter how I connect my 120mm-mini (the newer one with the USB-c)- Directly to the Rpi4, powered hub, or the ASI533 Hub,., indi doesn't see it.
It sees my ASI533 just fine as well as all my other gear.

My older Rpi4 2GB version running the 32bit version of Stellarmate sees it just fine. Same cables.

Has anyone else run into this with the 64bit version?
1 year 10 months ago #82927

Please Log in or Create an account to join the conversation.

  • Posts: 910
  • Thank you received: 86
-- Max S
ZWO AM5. RST-135. AZ-GTI. HEQ5. iOptron SkyTracker.
TPO RC6. FRA400. Rokinon 135 and other lenses.
ZWO ASI2600MC. D5500 modified with UVIR clip-in filter.
ZWO ASI120MM Mini x 2. ZWO 30F4 guider. Orion 50mm guider.
ZWO EAF x 2.
The following user(s) said Thank You: Kyle
1 year 10 months ago #82930

Please Log in or Create an account to join the conversation.

Odd, lsusb shows it as detected? or SM Dashbaord -> Hardware page?
1 year 10 months ago #82932

Please Log in or Create an account to join the conversation.

  • Posts: 3
  • Thank you received: 0
After a bit more fiddling I believe the issue may stem from my Pocket Power Box Adv Gen2.

If I unplug PPBA from the Pi with it turned off and then plug everything directly into the Pi and boot up....I can start indi servies which is able to detect everything just fine.
I have auto-connect turned off. At this point, I can plug my PPBA back into the Pi and the other gear back into the PPBA. Then I can go through and connect each piece of gear within the indi control panel.

However, if I stop indi services and then start them up again, the ASI120mm-mini no longer shows up again.

Jasem, I will check when I get back home tonight.

Thanks, Max! I will try your solution as well. Do you have PPB too?
1 year 10 months ago #82934

Please Log in or Create an account to join the conversation.

  • Posts: 910
  • Thank you received: 86
No, I don't have a PPBA.
-- Max S
ZWO AM5. RST-135. AZ-GTI. HEQ5. iOptron SkyTracker.
TPO RC6. FRA400. Rokinon 135 and other lenses.
ZWO ASI2600MC. D5500 modified with UVIR clip-in filter.
ZWO ASI120MM Mini x 2. ZWO 30F4 guider. Orion 50mm guider.
ZWO EAF x 2.
1 year 10 months ago #82939

Please Log in or Create an account to join the conversation.

  • Posts: 3
  • Thank you received: 0
Curiously enough, tonight everything worked as expected. The asi120mm-min connected no problem. Nothing was updated or changed, so I'm a bit baffled but happy everything seems to be fine.
1 year 10 months ago #82942

Please Log in or Create an account to join the conversation.

  • Posts: 910
  • Thank you received: 86
In my case, it didn't work until I applied the "chmod +rx /sys/bus/usb/devices/usb* in /etc/rc.local" hack.
Works just fine since then...
-- Max S
ZWO AM5. RST-135. AZ-GTI. HEQ5. iOptron SkyTracker.
TPO RC6. FRA400. Rokinon 135 and other lenses.
ZWO ASI2600MC. D5500 modified with UVIR clip-in filter.
ZWO ASI120MM Mini x 2. ZWO 30F4 guider. Orion 50mm guider.
ZWO EAF x 2.
1 year 10 months ago #82946

Please Log in or Create an account to join the conversation.

  • Posts: 910
  • Thank you received: 86
Something strange is going on with 64-bit.
Worked fine until today.

Yesterday I came back from a dark site where everything (including SM 64-bit) worked great and without a single fault.

Today I continued testing/setting-up my new mount and SM 64-bit worked well for some time until after one of reboots....
After that it wouldn't connect to any ZWO device, it would connect only to the mount.
Tried two different sd cards (which worked just a short time ago) - same behavior...

Tried 32-bi version - all works.

I am puzzled.... : (
-- Max S
ZWO AM5. RST-135. AZ-GTI. HEQ5. iOptron SkyTracker.
TPO RC6. FRA400. Rokinon 135 and other lenses.
ZWO ASI2600MC. D5500 modified with UVIR clip-in filter.
ZWO ASI120MM Mini x 2. ZWO 30F4 guider. Orion 50mm guider.
ZWO EAF x 2.
1 year 10 months ago #83026

Please Log in or Create an account to join the conversation.

This suggests some transient issue with USB. dmesg or lsbusb shows anything?
1 year 10 months ago #83033

Please Log in or Create an account to join the conversation.

  • Posts: 910
  • Thank you received: 86
lsusb:

Bus 002 Device 005: ID 03c3:260a ZWO ASI2600MC Pro
Bus 002 Device 006: ID 0781:5583 SanDisk Corp. Ultra Fit
Bus 002 Device 004: ID 05e3:0616 Genesys Logic, Inc. hub
Bus 002 Device 003: ID 05e3:0616 Genesys Logic, Inc. hub
Bus 002 Device 002: ID 0781:5583 SanDisk Corp. Ultra Fit
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 009: ID 03c3:120c ZWO ASI120MM Mini
Bus 001 Device 007: ID 03c3:1f10 ZW0 ZWO EFF
Bus 001 Device 005: ID 04b4:6572 Cypress Semiconductor Corp. Unprogrammed CY7C65642 hub
Bus 001 Device 011: ID 0403:6015 Future Technology Devices International, Ltd Bridge(I2C/SPI/UART/FIFO)
Bus 001 Device 010: ID 1233:1455 Denver Electronics iOptron iPolar
Bus 001 Device 008: ID 0130:1466 iOptron iGuider iOptron iGuider
Bus 001 Device 006: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 004: ID 05e3:0610 Genesys Logic, Inc. Hub
Bus 001 Device 003: ID 05e3:0610 Genesys Logic, Inc. Hub
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- Max S
ZWO AM5. RST-135. AZ-GTI. HEQ5. iOptron SkyTracker.
TPO RC6. FRA400. Rokinon 135 and other lenses.
ZWO ASI2600MC. D5500 modified with UVIR clip-in filter.
ZWO ASI120MM Mini x 2. ZWO 30F4 guider. Orion 50mm guider.
ZWO EAF x 2.
1 year 10 months ago #83035

Please Log in or Create an account to join the conversation.

  • Posts: 910
  • Thank you received: 86
if I boot with the mount physically disconnected - both ZWO cameras and EAF are visible and connect.
if I boot with the mount physically connected - only the mount connects, no ZWO.
oh... iPolar and iGuider do connect (but I don't intend to use them at this time).

I had a similar issue a while ago (when I switched from RPI3 to RPI4) with my HEQ5 and an EQDir cable based on a Cypress chip.
Once I switched to a different (Prolific?) cable the issue was gone.
-- Max S
ZWO AM5. RST-135. AZ-GTI. HEQ5. iOptron SkyTracker.
TPO RC6. FRA400. Rokinon 135 and other lenses.
ZWO ASI2600MC. D5500 modified with UVIR clip-in filter.
ZWO ASI120MM Mini x 2. ZWO 30F4 guider. Orion 50mm guider.
ZWO EAF x 2.
Last edit: 1 year 10 months ago by maxthebuilder.
1 year 10 months ago #83036

Please Log in or Create an account to join the conversation.

  • Posts: 910
  • Thank you received: 86
Tried again with all recent updates. SM 1.7.1
Doesn't work right. Exactly as my post above.
32bit works just fine.
That's with iOptron CEM40.

With RST-135 mount SM 64bit works great.
-- Max S
ZWO AM5. RST-135. AZ-GTI. HEQ5. iOptron SkyTracker.
TPO RC6. FRA400. Rokinon 135 and other lenses.
ZWO ASI2600MC. D5500 modified with UVIR clip-in filter.
ZWO ASI120MM Mini x 2. ZWO 30F4 guider. Orion 50mm guider.
ZWO EAF x 2.
1 year 9 months ago #83579

Please Log in or Create an account to join the conversation.

Time to create page: 0.477 seconds