×

INDI Library v2.0.0 Released (01 Feb 2023)

Bi-monthly release with major changes to INDI properties and client API in addition to new drivers and improvements.

I'm not sure about the internal guider and cable st4...

  • Posts: 95
  • Thank you received: 9
Hello,
I'm not sure about this panel.
I use a ASI224MC and a cable ST4 to connect this camera to my mount directly.
My guider is ASI224MC.
Via is ASI224MC or EQMod Mount ? I'm not sure about this choice.


Thank You,
Frank
3 months 4 weeks ago #87032
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 882
  • Thank you received: 87
Hi
If the mount is connected to the computer via an ASI224MC then:
Via: ASI224MC

If you upgrade to the latest version of EKOS, the term 'Guider' is used instead of 'Via'. The entry however remains the same.
HTH,
Steve
kubuntu 22.04
700d, eq6, 120mm. Yes, the old one.
Last edit: 3 months 4 weeks ago by alacant.
3 months 4 weeks ago #87034

Please Log in or Create an account to join the conversation.

  • Posts: 231
  • Thank you received: 59
If you have mount connected with eqmod cable then ditch ST4 and use guiding directly through mount driver.
3 months 4 weeks ago #87035

Please Log in or Create an account to join the conversation.

  • Posts: 95
  • Thank you received: 9
Ok, thank you for your messages.
To be clear, I use a cable st4 between my ASI224 and my mount.

So for you, it's not a good solution ?
3 months 4 weeks ago #87036

Please Log in or Create an account to join the conversation.

  • Posts: 231
  • Thank you received: 59
It will work. But it is one more cable, one more point of failure.
3 months 4 weeks ago #87037

Please Log in or Create an account to join the conversation.

  • Posts: 95
  • Thank you received: 9
Ok, I understand.
Thank you !
Last edit: 3 months 4 weeks ago by Frank.
3 months 4 weeks ago #87038

Please Log in or Create an account to join the conversation.

Time to create page: 0.428 seconds