×

INDI Library v1.7.8 Released (11 May 2019)

Mid year release of INDI Library v1.7.8 comes with a few drivers and improvements to to existing drivers.

StellarMate wont connect

  • Posts: 27
  • Thank you received: 2

StellarMate wont connect was created by suvowner

my StellarMate will no longer make a connection to my wifi network, and I can't see it in the list of wifi devices to connect to ??

any ideas, I tried restarting my apple router and no change.
6 months 3 days ago #31792

Please Log in or Create an account to join the conversation.

  • Posts: 382
  • Karma: 1
  • Thank you received: 59

Replied by AstroNerd on topic StellarMate wont connect

Which model rpi is it...as the older ones only wil connect to 2.4ghz connections, whereas most modern routers have a 5ghz connection too....? So make sure you have the 2.4ghz connection enabled on the router...
Just a thought.. :)
Stellarmate OS on Raspberry pi3b+ controlled with Kubuntu laptop
NEQ6 Pro, belt modded & tuned
Meade series 5000 80mm triplet Apo & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar Guide Camera
Pegasus Ultimate Hub for all USB & Power
Pegasus focus motors on both scopes
6 months 3 days ago #31793

Please Log in or Create an account to join the conversation.

  • Posts: 27
  • Thank you received: 2

Replied by suvowner on topic StellarMate wont connect

thanks but that's not it

it has been connecting no problem the last few days, but today it wont connect at all

i have the pi version that the StellarMate device is installed on.
6 months 3 days ago #31794

Please Log in or Create an account to join the conversation.

  • Posts: 1566
  • Karma: 19
  • Thank you received: 474

Replied by rlancaste on topic StellarMate wont connect

Why don’t you connect it to a tv or monitor via hdmi to see what it is doing?
6 months 2 days ago #31802

Please Log in or Create an account to join the conversation.

  • Posts: 38
  • Thank you received: 4

Replied by Lichtagent on topic StellarMate wont connect

rlancaste wrote: Why don’t you connect it to a tv or monitor via hdmi to see what it is doing?


I strongly second this...
In my case the RPi was stuck in emergency mode after power loss and some minor filesystem corruption.

If for any reason you're not able to connect it to a monitor, but have an USB-keyboard at hand try Ctrl&D some time after starting the RPi - you may be lucky...

But as said before - connect it to a screen and have a look.

Cheers & CS

Chris
6 months 1 day ago #31855

Please Log in or Create an account to join the conversation.

  • Posts: 27
  • Thank you received: 2

Replied by suvowner on topic StellarMate wont connect

ok, so I found a hdmi cable and a monitor with a hdmi input, and after plugging in nd powering up the StellarMate the monitor just says not supported ?

when i power off the pi the not supported warning goes away on the monitor
6 months 22 hours ago #31891

Please Log in or Create an account to join the conversation.

Replied by knro on topic StellarMate wont connect

StellarMate OS v1.3.1 was released today. Download it and give it a go.
Jasem Mutlaq
Support INDI & Ekos; Get StellarMate Astrophotography Gadget.
How to Submit Logs when you have problems?
Add your observatory info
The following user(s) said Thank You: starman345
6 months 21 hours ago #31896

Please Log in or Create an account to join the conversation.

  • Posts: 27
  • Thank you received: 2

Replied by suvowner on topic StellarMate wont connect

ok, but how do I do that if I can't access the device ??
6 months 19 hours ago #31897

Please Log in or Create an account to join the conversation.

Replied by knro on topic StellarMate wont connect

Just sent you a link to the updated image.
Jasem Mutlaq
Support INDI & Ekos; Get StellarMate Astrophotography Gadget.
How to Submit Logs when you have problems?
Add your observatory info
The following user(s) said Thank You: suvowner
6 months 11 hours ago #31901

Please Log in or Create an account to join the conversation.

  • Posts: 27
  • Thank you received: 2

Replied by suvowner on topic StellarMate wont connect

the new version seems to have worked. the quick hash file would not open on mac os mojave, but it did require the etcher to install to the sd card for it to boot up.

did I do something wrong to cause it to not want to boot up. does it matter if you just cut the power to the pi, or should I shut it down before cutting the power to it ??
6 months 5 hours ago #31907

Please Log in or Create an account to join the conversation.

  • Posts: 38
  • Thank you received: 4

Replied by Lichtagent on topic StellarMate wont connect

@suvowner
Debian is very nitpicky about cutting the power without shutting down the OS.
As in my case the file system tends to get corrupted quite easily.

So always(!) make sure the OS is shut down correctly before powering down your RPi.

Cheers and CS

Chris
The following user(s) said Thank You: suvowner
6 months 4 hours ago #31908

Please Log in or Create an account to join the conversation.

  • Posts: 27
  • Thank you received: 2

Replied by suvowner on topic StellarMate wont connect

ok, by correctly what exactly is correctly ??

all i see is the power button in the corner, click it and hit shutdown, what else ??? some period of time before cutting the power ??
6 months 4 hours ago #31909

Please Log in or Create an account to join the conversation.

Time to create page: 0.859 seconds