From recent experience, I can confirm that my Samsung T5 1TB SSD works down to at least -8.5 C.
120 MM Skywatcher Esprit + Celestron CGX, ZWO ASI 224MC guiding, Pegasus FocusCube+PPBA
Nikon Z7 8256 x 5504 4.34 um. Triad Ultra Quad NB Filter
1) MeLE Quieter3C 8G Ubuntu-mate 22.04.1 2) Odroid-N2. 3) StellarMate RPI4 8G
The good, the bad, the ugly at sciencedowneast.no-ip.ca/zenphoto/
Not sure if it has already been mentioned but an important factor when choosing a hub is that the cable used to connect the Pi USB to the hub to carry the data should ONLY have the 2 data and the Ground wires connected. Otherwise a possibly badly regulated supply goes straight onto the Pi's bus. A list of tested hubs can be found here:
Nice to hear that I also have a 2.5 "Crucial SSD MX500 250GB
I never had problems with my unpowered Anker 4 Port USB Hub. Only the ASI120MM needs power and that is also supplied by the RPI. But I want to add a WiFi USB stick and a USB SSD that doesn't work with a unpowered USB hub only.
My Mount is connected directly to a USB2 Port on the RPI
At the moment I have 3 cables that go up to the telescope. DSLR power, ZWO focuser and dew straps power (Y Cable) and my USB hub.
I don't need to supply the RPI with power via the USB hub, but if I can, why not?
I can also mount the powered USB hub directly on the telescope with a 3-way distributor for power, but then I would also have to mount the SSD on the telescope, which would mean additional weight. I'm pretty close to the photographic limit of my mount.
Pentaflex Newton 150/750
Skywatcher 9x50 with ZWO ASI120MM Mini
GPU aplanatic coma corrector
Canon EOS 650D(a) ; Canon EOS 6D ; Canon EOS 450D(a)
ZWO EAF motofocus
Raspberry Pi4 4GB with Stellarmate OS
I have the powered Anker 7 port USB 3.0 Hub with built in charging port from that list. I've been using it for 10 months with an RPi 4/4GB and Astroberry with no issues. I don't use the charging port but have my mount, Canon DSLR and QHY camera all plugged into it. Its also 12 volt so works well with everything else. Also had no issues with it in -15C weather.
ES ED102 on Losmandy G11G
ASI071MC Pro, QHY5-III 178C
Ubuntu 20.04 LTS on MeLE Quieter2Q
I’m currently running the iOptron CEM70g and am considering using Stellarmate Plus for a completely wireless connection.
My question is, does any have, tried or heard of anyone making a successful connection?
If not, does anyone have an opinion on whether it will work?
The CEM70g has got a powered Usb3 hub and WiFi built in. However the WiFi will only allow for wireless mount control only and not any devices attached to the hub hence my considering using Stellarmate Plus.
This is great news, thank you Jasem for the quick response. Hope he is enjoying its features!
So I just need to purchase the SM+? Or do I also need the Ikarus Technologies Mount USB Cable (iOptron)?