Hi All,
SM 1.4.3.
RTC works fine on my RPI3.
On my new RPI4 I cannot make it work.
I have dtoverlay=i2c-rtc,ds3231 added to my config.txt (it was there by default).
When I issue sudo i2cdetect -y 1, nothing shows up.
How to configure RTC on RPI4, please?
Thanks!
-- Max S
ZWO AM5. RST-135. AZ-GTI. HEQ5. iOptron SkyTracker.
TPO RC6. FRA400. Rokinon 135 and other lenses.
ZWO ASI2600MC. D5500 modified with UVIR clip-in filter.
ZWO ASI120MM Mini x 2. ZWO 30F4 guider. Orion 50mm guider.
ZWO EAF x 3.
It behaves as the module doesn't exist or defective..
I tried another RTC module (exactly the same) which did work with RPI3.
Same story. Doesn't show up when I issue sudo i2cdetect -y 1.
: (
-- Max S
ZWO AM5. RST-135. AZ-GTI. HEQ5. iOptron SkyTracker.
TPO RC6. FRA400. Rokinon 135 and other lenses.
ZWO ASI2600MC. D5500 modified with UVIR clip-in filter.
ZWO ASI120MM Mini x 2. ZWO 30F4 guider. Orion 50mm guider.
ZWO EAF x 3.
I got an RTC for my new RPi4 and at first it did not show up. But changing my i2c bus speed while tweaking it for my motor controller board suddenly made it show up. Or so I thought. The next time I configured the system I could not repeat my earlier success. I thought maybe the higher speed damaged it. But now I'm not sure because others are also having trouble.