×

INDI Library v2.0.4 Released (01 Oct 2023)

Bi-monthly release with minor bug fixes and improvements

Read More...

1.5 - Checksums do not match

  • Posts: 12
  • Thank you received: 1

1.5 - Checksums do not match was created by Bentley Ousley

Is there a known issue with Etcher showing a "Checksums do not match" message for 1.5? The hash is fine, but when flashing to Etcher it shows "1 failed device" with the checksum error. I've tried redownloading the image, using a different SD card, even using a different card reader. Still the same issue.
3 years 9 months ago #49638

Please Log in or Create an account to join the conversation.

  • Posts: 398
  • Thank you received: 117

Replied by Doug S on topic 1.5 - Checksums do not match

FYI, I downloaded the SM OS 1.5 file, and the quickhash SW (windows). The MD5 hash matches. I've since burned on to the SD card using Etcher, and fired it up. All seems to work fine...
RASA11, Celestron CGX-L, ASI183mc Pro, 60mm guider + ASI290mm mini, ASI EAF focuser, PPB, Rpi4-4Gb+SSD, Powered USB3 hub, hardwire Ethernet.
Last edit: 3 years 9 months ago by Doug S. Reason: missed adding that Etcher was used.
3 years 9 months ago #49640

Please Log in or Create an account to join the conversation.

  • Posts: 12
  • Thank you received: 1

Replied by Bentley Ousley on topic 1.5 - Checksums do not match

Thank you for your feedback. So ... you aren't getting the "1 failed device" notice from Etcher? Any ideas about what might be happening? I tried the SD card in RPI4 and the Stellarmate functionality seems to work. I would feel better if I knew the cause for the error.
3 years 9 months ago #49690

Please Log in or Create an account to join the conversation.

Time to create page: 0.431 seconds