I upgraded to 1.8.8 today and now the guider is not longer working.
I am using the QHY CCD driver. When I try and capture I get a timeout error. The camera gives a "GetQHYCCDSingleFrame error (-1)" error.
Any idea's? It worked fine yesterday.
WO ZS 61
Edgehd 8 with Celestron OAG
Stellarmate on RPi 4
294 mc pro
224 planetary cam
174 guide cam
Sesto Senso focusser
QHY5II-Mono guide camera
EOS6D - not modified
I am running on Raspbian (november release) on a Raspberry Pi 4.
If that's you too, these are the files I used to update my drivers.
(Please backup, your originals, etc, and take care ...)
I replaced the 3 qhy libraries with the same names as the files in the below link in /usr/lib/arm-linux-gnueabiaf/ drive.google.com/drive/folders/1NtACfuZi...mjnnt7uC?usp=sharing
After doing that qhy_ccd_test and Ekos worked again with my QHY 5L-II mono camera.
Orion Atlas Pro, William Optics ZS105, Moonlight V2 focuser
ZWO ASI1600, OAG & Filterwheel, Astronomik Filters, QHY 5L-IIm guidecam.
KStars/Ekos/Indi on RPi4 w/SSD
Ekos Projects: Terrain Backgrounds, Polar Alignment, Analyze, Linear Focuser, SEP MultiStar & GPG Guiding, FITS autostretch.