INDI driver for Pegasus Ultimate Power hub
AstroNerd wrote: One thing to try..
Disconnect any other kit when you connect the UPB and see if that works, if it does then use the serial mapping then connect other kit... that worked for me on the early indigo driver...
Yeah I actually tried it with only simulator and still it disconnected right away. I'm pretty sure as well that this could be a serial issue!
knro wrote: please purge indi-bin and libindi and update (sudo apt-get update) and then reinstall them again something was not installed correctly.
I did this and everything works now! Thank you so much! Now I can clear my cable mess finally and control all my outputs and heaters from INDI
any idea when will this indi driver will be available for raspberry pi (raspbian)?
DEBUG 708.281371 sec : Connecting to /dev/ttyUSB1
DEBUG 708.283575 sec : Port FD 4
DEBUG 708.283822 sec : Connection successful, attempting handshake...
DEBUG 708.283950 sec : CMD <P#>
>EBUG 708.339911 sec : RES <UPB_OK
DEBUG 708.340122 sec : Handshake failed.
I've built indilib from the latest repo. any idea what might be wrong?