Do you know if KStars/Ekos supports showing live video from the SV305?
I tried both the remote version running on my RPi and the Windows version connected to the INDI Web Manager also running on the RPi.
All I got was a black screen.
I confirmed the camera is still working with SharpCap on Windows.
I get some "chess board effects" in B&W, due to the bayer matrix, but if you toggle the "bayer" button, it works well.
(no resize, ROI or binning, just basic streaming)
Do you get a black screen ?
The default exposure time in liveview is very short. Streamed frames are very dark.
I just tried another test and I'm getting some light now. I don't know why I was getting black the other day. This test was outside light hitting the CCD (or CMOS) directly, with my hand partially blocking the chip.
Exposure time is the default, whatever that is.
Uncovered is light grey (2nd attachment) which I guess is normal.
I'm using AstroDMx for the time-being until I've got this figured out.
updated via your comment but was still unable to get driver(s) working.
Then I tried another poster's suggestion of changing names of drivers in various locations and then performing same update you posted, still not working (and now the manually built/installed driver versions are unavailable as a choice in indi).
The error I get when trying to start the "SVBONY" driver (only one avail for profile) is: 2020-09-21T22:21:45: [ERROR] Error: unable to open device. Cannot identify /dev/video0: 2, No such file or directory
Should I consider just a fresh Astroberry install and then start over with adding the indi library and functionality? If so, is there a comprehensive guide for that (current build is base AB then added indi lib then built drivers for svbony sv305)? Thanks
I've already tried the sudo install (i mention this in the post you replied to) , this resulted in the error mentioned in same post.
I also have ADMx installed, still getting the error above. Before that, I'd built the drivers using instructions here, and those were giving errors as well.
I am using the indi-sv305 driver on both a pi3 and pi4 with good success. I am not using Ekos, rather just PHD2 for guiding, local Astrometry.net for plate solving and AstroDMx_Capture for imaging. No issues. I used sudo apt install indi-sv305 after first adding the ppa per the INDI instructions for the pi3, but had to download and compile from github for the pi4. The only compile issues I saw were warning error messages that were not important. Some C programmers will use variables in functions where the sizes don't match if they know the data in the variable will never exceed the limits in runtime. It is a tiny bit sloppy on the compile side, but causes no real runtime error.
Just FYI, I am very happy with the performance of the SV305 as a guide camera on a 240mm x 60mm guide scope binning 4X4. Nice, crispy stars that plate solve with local Astrometry.net in about 15 seconds and make PHD2 very happy.
Sometimes, if you have messed about a bit, your camera may end up on /dev/video1 or some other number besides video0. This can be caused by something else already on video0, restarting indiserver or some other operation involving video devices. Usually, a reboot will reset things and your first instance of the indiserver calling the indi_sv305_ccd will put it on /dev/video0. If that is not the case, then you might have to change the configuration or find whatever is grabbing /dev/video0 first and move it.
SkyWatcher 10" SynScan Goto Dobsonian, SV106 Guide, ZWO ASI178MC, Svbony SV105, SV305, Pi3HQcam, Pi4, DIY WaveShare focuser, Linux Ubuntu, KStars/Ekos, Carte du Ciel/CCDCiel, AstroDMx_Capture, Siril, StarTools, GIMP
I got my sv305 Pro in the mail yesterday, and did some guiding with phd2. This was my first time guiding, but I did identify some periodic error from my ieq30 pro, so I wanted to record the PEC. I do have the sv305p hooked up to the st4 port, and set up the phd2 equipment profile to use an on-camera mount, but the option to "connect" stays grayed out. This is on a rpi4 running astroberry.
If I connect to the camera directly with a windows machine, the on-camera mount "connect" button is available, but the windows driver doesn't seem to support binning, so I couldn't see any stars (class 8 bortle with a full moon).
Cool, hopefully they can provide one. Until then, perhaps I can help?
Looking at a couple of other st4-enabled drivers on github, it seems there needs to be another driver built specifically for the on-camera guiding.
of header files for st4 guiders. The first, asi-st4, might be more useful as it also has a separate ccd driver. They both share a similar format though, in that they provide the same methods. Perhaps we need a sv305-st4.h and corresponding cpp file? I don't yet have the sv305 sdk though, so I'm not sure what those would look like beyond what's already common between the asi-st4 and arduino-st4 drivers.