×

INDI Library v1.9.8 Released (29 Sep 2022)

Bi-monthly INDI Library released with new drivers and bug fixes.

INDI Driver for SVBONY cameras

  • Posts: 10
  • Thank you received: 6
I have created an indi_sv305_ccd driver for the SV405CC.

After a little while, I'll send a pull request to GitHub.
The following changes were made in addition to the SV405CC support.
  1. Improvement: OFFSET suppot on Ekos Camera module.
  2. Fixed a mutex conflict that occurred when two or more SVBONY cameras are connected.
  3. Added break to case SVB_BLACK_LEVEL of Sv305CCD::Connect.

Thanks
The following user(s) said Thank You: Jasem Mutlaq, Collin, Albert Tamayo, R Dan Nafe
Last edit: 5 months 2 weeks ago by tkakura.
5 months 2 weeks ago #83473
Attachments:
The topic has been locked.
  • Posts: 10
  • Thank you received: 1
Don't know if this is related to this change but now, the indi_sv305_ccd crashes with or without any camera plugged-in:
Driver indi_sv305_ccd: indi_sv305_ccd: symbol lookup error: indi_sv305_ccd: undefined symbol: _ZN4INDI3CCD15addFITSKeywordsEP8fitsfilePNS_7CCDChipE


Ubuntu 20.04.4 LTS
Linux XXXXXXXX 5.13.0-51-generic #58~20.04.1-Ubuntu SMP Tue Jun 14 11:29:12 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux

KStars
Version 3.6.0 Beta

indiserver --version
[...]
INDI Library: 1.9.7
Code 1.9.7-tgz. Protocol 1.7.
Last edit: 4 months 4 weeks ago by Deneb-l. Reason: Error message did not appear when quoted
4 months 4 weeks ago #83926
The topic has been locked.
  • Posts: 10
  • Thank you received: 6
Arguments of addFITSKeywords has been changed form INDI 1.9.7.
You have to rebuild indi-3rdparty drivers when drivers run with INDI 1.9.7.
The following user(s) said Thank You: Deneb-l
4 months 4 weeks ago #83928
The topic has been locked.
  • Posts: 10
  • Thank you received: 1
Rebuilding the3rd party made the trick.
Anyway, I had previously installed the Ubuntu package (apt install indi-sv305), so, had to make my first 3rd party install.
For those who are in the same situation:
  • Remove previous package:
    sudo apt remove indi-sv305
  • Clean previous packages:
    sudo apt autoremove
  • Download or pull the code from: github.com/indilib/indi-3rdparty
  • Install packages requested for the build:
    sudo apt-get -y install libnova-dev libcfitsio-dev libusb-1.0-0-dev zlib1g-dev libgsl-dev build-essential cmake git libjpeg-dev libcurl4-gnutls-dev libtiff-dev libfftw3-dev libftdi-dev libgps-dev libraw-dev libdc1394-22-dev libgphoto2-dev libboost-dev libboost-regex-dev librtlsdr-dev liblimesuite-dev libftdi1-dev libavcodec-dev libavdevice-dev
  • in my case, I had to remove and reinstall libraw19 (???)
  • From the folder whre you pulled indi-3rdparty-master, follow the README instructions
    $ cmake -DCMAKE_INSTALL_PREFIX=/usr .
    $ make
    $ sudo make install
Now, the drivers does not crash anymore (haven't test yest with the Camera though)
Hope it helps
4 months 4 weeks ago #83952
The topic has been locked.
  • Posts: 10
  • Thank you received: 1
Rebuilding the3rd party made the trick.
Anyway, I had previously installed the Ubuntu package (apt install indi-sv305), so, had to make my first 3rd party install.
For those who are in the same situation:
  • Remove previous package:
    sudo apt remove indi-sv305
  • Clean previous packages:
    sudo apt autoremove
  • Download or pull the code from: github.com/indilib/indi-3rdparty
  • Install packages requested for the build:
    sudo apt-get -y install libnova-dev libcfitsio-dev libusb-1.0-0-dev zlib1g-dev libgsl-dev build-essential cmake git libjpeg-dev libcurl4-gnutls-dev libtiff-dev libfftw3-dev libftdi-dev libgps-dev libraw-dev libdc1394-22-dev libgphoto2-dev libboost-dev libboost-regex-dev librtlsdr-dev liblimesuite-dev libftdi1-dev libavcodec-dev libavdevice-dev
  • in my case, I had to remove and reinstall libraw19 (???)
  • From the folder whre you pulled indi-3rdparty-master, follow the README instructions
    $ cmake -DCMAKE_INSTALL_PREFIX=/usr .
    $ make
    $ sudo make install
Now, the drivers does not crash anymore (haven't test yest with the Camera though)
Hope it helps
4 months 4 weeks ago #83953
The topic has been locked.
  • Posts: 145
  • Thank you received: 5

Replied by Phil on topic INDI Driver for SVBONY cameras

Will this ever be integrated into Astroberry? I just installed astroberry-server_2.0.4.img on a fresh card, ran the updates, but I still don't see the SV905C, only the SV105/205/305 cameras.
4 months 1 week ago #84405
The topic has been locked.
  • Posts: 6
  • Thank you received: 0
Hello,
How to put the right pixel size in V4L2 for the Svbony SV205 camera, because in V4L2 the size is 4µm x 4µm, while for the SONY IMX179 sensor the size is 1.4µmx1.4µm.
Sylvain
2 months 2 weeks ago #86199
The topic has been locked.
  • Posts: 10
  • Thank you received: 6
You should choose driver “SVBONY SV305” if you use SV305 or later model.
2 months 2 weeks ago #86211
The topic has been locked.
  • Posts: 10
  • Thank you received: 1
Hello Sylvain.
To set the pixel size, you have to connect your Camera and start the Indi Server first.
Once connected, go to "Image Info" Tab and set Pixel size in the right column. You may also want to set the Max Width and Height of the Camera.
One you are done, click the set button see attached ScreenShot.
Note that the values are unfortunately not kept between sessions. This may be improved in the future.
Last edit: 2 months 2 weeks ago by Deneb-l. Reason: Forgot to mention tjat value are not kept.
2 months 2 weeks ago #86223
Attachments:
The topic has been locked.
  • Posts: 19
  • Thank you received: 1
[quote="Here follows two images meant to illustrate what I have been talking about.

Messed up-

Correct?- "[/quote]

Is there still no one else who have seen this behaviour on their setup?

I tried connecting the camera to a Windows PC, and the same behaviour was still there. USB cable does not matter. Connecting it through the hub on my 533MC or directly to the PC does not matter.
Last edit: 3 weeks 6 days ago by Simon Andersson.
3 weeks 6 days ago #87694
The topic has been locked.
  • Posts: 10
  • Thank you received: 1
Hello. Good news, I had the same issue with my SVBony cameras (so you are not alone with the issue), bad news, I do not remember how I solved it. What I perfectly remember was that I never had this issue with the camera and AstroDMX (I'm using Ubuntu ) on the same setup so I knew this was not a hardware but a soft/setting matter. I will retrieve my setup this evening and try to post my driver settings in few hours.

Grrrr, several hours later, I retrieved my PC but my Camera is not here and I cannot see my settings unless I start an Indy session with the device plugged-in. Will take a while until I can post. Sorry.
The following user(s) said Thank You: R Dan Nafe
Last edit: 3 weeks 5 days ago by Deneb-l.
3 weeks 6 days ago #87707
The topic has been locked.
  • Posts: 19
  • Thank you received: 1
That's alrigt, I am ín no hurry. The mother of all clouds have placed herself over where I live anyway. I haven't seen the stars, and won't see them, for at least a week.

In the meantime, maybe I need to familiarize myself with all the settings available in the INDI drivers.

I have tried astrodmx for few minutes, this was on WIndows. I can at least say that the images from the camera looked different. Will look more into this.
Last edit: 3 weeks 4 days ago by Simon Andersson.
3 weeks 4 days ago #87752
The topic has been locked.
Time to create page: 1.293 seconds