Hi Radek,
Thanks for your fast respons, not many week left of this dark season in Sweden.

You are correct, EQMOD direct cable, no hand terminal. EQMOD driver used. I have tried both to have it connected to RP direct or through the USB HUB.

I can have USB-Focuser connected at the same time as EQMOD. But not Canon DSLR or QHY5 camera (guide camera).

Before I enabled the GPSD driver my location was set to Warsav of Poland. Can I change the location from some menu or must I always use the command window and some sudo command ?

How it come that when I connect my devices one after one that they later change the USB adress and come in conflict ? For now I only have GPSD as a virtual, can it still conflict the USB address ? Later I shall attache a GPS device, but must first solve this conflict problem. I don't really understand, more Windows knowledge, not Linux.

In Windows I can always in advanced mode change the USB address the device is connected to, is there something similar in Linux ? I mean force each USB device to have a unique address. And if it's possible, how do I do that ?

Here is my project page with the new HEQ5 mount:
www.astrofriend.eu/astronomy/projects/project-heq5/01-heq5.html

Thanks for all help, because I'm stuck here.

/Lars

Read More...