HelloJasem and thank you for the reply
I had this morning a response from the driver's author who is currently very busy and who can certainly take care of it in one or two months.
It's not urgent and I can wait.
Philippe
Read More...
Hello
My configuration: Tinkerboard S with Ksars Ekos
I have a problem with AAGCloudWatcher weather station. I want to impose a port defined by a rule (meteo for example) but every time the software is restarted it returns to ttyUSB0!
Do you have an idea to avoid this problem?
Thanks for your help
Philippe
Read More...
Thank you very much Dokeeffe, the build works well now. 
Now i have a connection problem "Request failed".
The RJ45 CPC to RS232 cable is good.
The RS232 / USB converter is the one I used with the handcontroller
I tested in 9600 and 19200 baud and the port detected in serial is / dev / ttyUSB0
I continue my research
Philippe
Read More...
Hello Dokeefee
I tried to compile ip-focuser and I also have some errors.
Maybe there is a link?
Philippe
Read More...
Thanks Dokeefee for using AUX commands
I'm using the Ubuntu Mate 16.04 version and I have errors when using the build
Thanks
Philippe
Read More...
Thanks for this information, I did not know that NexRemote was running on Linux.
There is a special version for Linux to install on the PC connected locally to the telescope ?.
Thanks for your help
Philippe
Read More...
Thank you pcxz
I can use the hand control but for the moment in remote mode, I can not stop and restart the power of the CPC without do an initialization locally
Philippe
Read More...
Hello
I have a celestron telescope CPC800 GPS XTL with a Nexstar firmware controller 4.21
When I want to select the hibernation mode I have the message
Firmware v4.2 does not support hibernation Minimum required version is 4.2?
What is the necessary version of Nextar to be able to pass the mount in hibernation?
Thank you
Philippe
Read More...
Indiserver is OK on Ubuntu
● indiwebmanager.service - INDI Web Manager
Loaded: loaded (/lib/systemd/system/indiwebmanager.service; enabled; vendor preset: enabled)
Active: active (running) since jeu. 2017-03-30 10:10:48 CEST; 1min 23s ago
Main PID: 1728 (python)
CGroup: /system.slice/indiwebmanager.service
└─1728 /usr/bin/python /home/phb/servermanager/drivermanager.py
mars 30 10:10:48 phb-GB systemd[1]: Started INDI Web Manager.
mars 30 10:10:49 phb-GB python[1728]: Bottle v0.12.7 server starting up (using WSGIRefServer())...
mars 30 10:10:49 phb-GB python[1728]: Listening on http://0.0.0.0:8624/
mars 30 10:10:49 phb-GB python[1728]: Hit Ctrl-C to quit.
But the indiserver will only start automatically if I delete the program autostart.py in the indiwebmanager!
The profiles are the same in remote and local!
I am a beginner in linux and in english 
Thanks
Read More...