I do not have a permanent telescope setup and the weather has been stormy recently (I live in North Carolina, USA).

Right now, for testing, this is the configuation. Only the other connected devices change when I'm at the telescope:

- RPI3 using Ubuntu-mate 16.04 - unsure of source but it was a very easy install.
- RPI3 is connected to wifi network at home
- Currently setup with Telescope Simulator
- Currently setup with CCD Simulator
- EFW is connected by USB directly from device to USB port. (It clearly is connected and available per diagnostic info in original post)

I run my profile in LOCAL mode. In the original post, I posted some screenshots that may help. Perhaps a related symptom is that I find the CCD will not connect in remote mode. I actually just checked and in remote mode, nothing connects. In Local mode, the telescope and CCD simulators connect. The EFW does not connect. The message panel tells me "Unable to Establish: + ASI Wheel Please ensure the device is connected and powered on". To me, this is indicating INDI isn't recognizing the device. The udev/rules.d file contents for 99-efw.rulesare above, assuming INDI it referenced for the correct file name. My guess is something to do with this file is the problem - but I'm not really familiar with the inner workings of ekos/indi.

Thank for the help so far. I'm happy to continue trying things out if you have anything else to check.

-Matt

Read More...