Hi Jasem,
I finally got an opportunity to collect logs for this issue. As I mentioned before, I am not able to slew the mount to any target from Kstars. It doesn't seem to do anything. Please take a look at the logs and let me know is you could find anything.
Appreciate any help,
Thanks
Read More...
Hi Knro,
unfortunately I hadn't enabled the logs, I will try to do it tonight ( if weather permits) and send it over.
Here is what I had done leading up to the problem:
I manually made sure my mount is polar aligned and then after starting INDI/KSTARS, I unpack the telescope and then try to track it - but I got multiple problems in fact:
1. when I try to select a star and then slew, the crosshair doesn't stay there it keeps coming back to original position no matter what I do and I am unable to slew.
2. in the meantime, the INDI connection to mount keeps crashing often and I will have to reset
3. I decided to polar align since I was not able to slew anywhere and then encountered the problem of mount going all the way to below the horizon to a point where the mount cannot move any more and it stalls.
I know you will definitely need logs to figure this out, I will try to get that out when the next opportunity presents itself. in the meantime if you could provide me some tips, I can try it out at my next outing.
Thanks and appreciate your time.
Read More...
I have a CEM60 and Orion SSAG connected to INDI and using PHD2 guiding, when I start polar alignment - the mount goes below the horizon even though the polaris is within the FOV on my home position. What is going on?
Read More...
Hi,
I am planning to use D5100 with a Mac and I wanted to know if any one else had success using it with Ekos? I have heard that for D5100 to work in Blub mode, a DSUSB cable is needed. I know the DSUSB cable works for other software like BackyardNikon, MaximDL. Just wanted to confirm that is the case with Ekos as well?
Please share your experiences.
Thanks
Read More...