Marc created a new topic ' Bug connecting through a hub ...' in the forum. 3 years ago

Hello everybody,

After a few months off, I'm back to deep sky imaging. So two days ago, after having updated everything, ( Fedora 34 and last GitHub version ) I had a very bad surprise.
Usually my setup for deep sky imaging is the following :

- one mount SW EQ6-R Pro
- one ASI1600mm Pro ( imaging )
- one ASI290mm ( autoguiding)
- one ASI EFW mini filter wheel
- one ASI EAF focuser.

I used to connect the ASI290mm and the EFW to the two port hub on the ASI1600mm, and the rest directly to the Raspberry Pi.
This setup used to work perfectly several months ago.

Now, INDI refuses to discover what is plugged to the camera hub, and after a few minutes, everything is freezzed
If I plug everything directly to the Raspberry Pi, it works again, except ... The Pi has only 4 USB ports :( ... So I'm left with a device with no possible connection, except if I chain a second PI. Any kind of separate hub has the same result. What's connected to the hub fails, what's connected directly works. And this with the Pi or directly with my laptop.

Some help would be appreciated. :)

- Marc

Read More...