Chris Amos replied to the topic 'QHY5 - [ERROR] GetQHYCCDSingleFrame error (-1)' in the forum. 1 week ago

Hi all,

I have just rebuilt my OdroidXU4 and this new version of the QHY driver works wonderfully well.

Thank you for sorting this issue.

Chris

Read More...

Chris Amos replied to the topic 'QHY5 - [ERROR] GetQHYCCDSingleFrame error (-1)' in the forum. 4 weeks ago

:-(

Is there any way to revert to an older QHY driver while we wait for the fix?

Read More...

Chris Amos created a new topic ' QHY5 - [ERROR] GetQHYCCDSingleFrame error (-1)' in the forum. 4 weeks ago

Hi,
I have just re-installed Indi and KStars and my QHY5 has stopped working and gives this error [ERROR] GetQHYCCDSingleFrame error (-1) .

Any thoughts on what I can do as I have lost a nights imaging and we don't get very many in the UK at the moment.

DRiver is version 2.5

Many thanks in anticipation

Chris

Read More...

Stephane thanked Chris Amos in topic Old QHY5 not detected 6 months ago

Chris Amos replied to the topic 'Old QHY5 not detected' in the forum. 6 months ago

Hi,
Having read many posts and tried many things the one that worked was to make a change to the udev rules files. On my system the files are

/lib/udev/rules.d/85-qhyccd.rules

/etc/udev/rules.d/85-qhy.rules

Look for the line below and make sure you have the QHY5LOADER.HEX bit on the end.

ATTRS{idVendor}=="1618", ATTRS{idProduct}=="0901", RUN+="/sbin/fxload -t fx2 -I /lib/firmware/qhy/QHY5.HEX -D $env{DEVNAME} -s /lib/firmware/qhy/QHY5LOADER.HEX"

This worked for me.

Read More...

Chris Amos created a new topic ' Old QHY5 not detected' in the forum. 7 months ago

Hi,
I am new to Indi and am running it on an OdroidXU4 (ARM based, running Ubuntu 18.04.2 LTS armv7l -32-bit). I just cannot get the QHY5 (old one abd pre-dates QHY5II).

When i run dmesg i get

[42536.891911] RTL871X: set group key camid:5, addr:ec:f4:51:64:cb:bc, kid:1, type:AES
[42916.759625] usb 3-1.1.2: new high-speed USB device number 31 using xhci-hcd
[42916.872271] usb 3-1.1.2: New USB device found, idVendor=1618, idProduct=0901
[42916.872319] usb 3-1.1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[42916.951381] usb 3-1.1.2: usbfs: USBDEVFS_CONTROL failed cmd fxload rqt 64 rq 160 len 1 ret -71
[42917.035445] usb 3-1.1.2: USB disconnect, device number 31
[42918.807659] usb 3-1.1.2: new high-speed USB device number 32 using xhci-hcd
[42923.967640] usb 3-1.1.2: device descriptor read/64, error -110
[42939.583797] usb 3-1.1.2: device descriptor read/64, error -110
[42939.787735] usb 3-1.1.2: new high-speed USB device number 33 using xhci-hcd
[42944.959889] usb 3-1.1.2: device descriptor read/64, error -110
[42960.579780] usb 3-1.1.2: device descriptor read/64, error -110
[42960.692978] usb 3-1.1-port2: attempt power cycle
[42961.323704] usb 3-1.1.2: new high-speed USB device number 34 using xhci-hcd
[42966.371865] usb 3-1.1.2: device descriptor read/8, error -110
[42971.751853] usb 3-1.1.2: device descriptor read/8, error -110
[42971.959862] usb 3-1.1.2: new high-speed USB device number 35 using xhci-hcd
[42977.124094] usb 3-1.1.2: device descriptor read/8, error -110
[42982.499889] usb 3-1.1.2: device descriptor read/8, error -110
[42982.613493] usb 3-1.1-port2: unable to enumerate USB device

Can anyone help?

Read More...