PC CONNECTION MODE set to USB TETHER SHOOTING AUTO
SHOOT WITHOUT LENS enabled
All other settings are default after a reset
Raspberry Pi 4 (2GB) running StellarMate 1.4.4
I am using the "GPhoto CCD" driver
I'm able to take photos with using the "preview" button in the capture module (JPEG, compressed) and the image shows in a pop-up window. The problem is that the shutter speed icon on the camera's display changes from "BULB" to "100", and it's only taking a 1/100s exposure even if the exposure length is set to 1s.
I did notice that changing the exposure length to 10s causes the camera to take a 1/10s exposure and so on. The problem is that if I set it to 100s the camera will take the correct exposure time, but ekos will wait the full 100s... Is there a setting to change the exposure time scale or something?