Hi Stefan, I am in contact with Cha at QHY. I am just wondering if the problem is the camera or the FW.
When I plug the QHY294M with FW in 4 pin mode into my indi server and immediately type in a terminal window:
I get the following output:
[88253.519410] usb 1-10: new high-speed USB device number 5 using xhci_hcd
[88253.667699] usb 1-10: New USB device found, idVendor=1618, idProduct=c296, bcdDevice= 1.00
[88253.667705] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[88253.667708] usb 1-10: Product: WestBridge
[88253.667711] usb 1-10: Manufacturer: Cypress
[88253.667714] usb 1-10: SerialNumber: 0000000004BE
[88253.771214] usb 1-10: USB disconnect, device number 5
[88254.083480] usb 2-5: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[88254.104010] usb 2-5: LPM exit latency is zeroed, disabling LPM.
[88254.104659] usb 2-5: New USB device found, idVendor=1618, idProduct=c297, bcdDevice= 0.00
[88254.104664] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[88254.104668] usb 2-5: Product: QHY294P-V210220
[88254.104671] usb 2-5: Manufacturer: QHYCCD
(ignore he long decimal numbers on the left).
This is exactly the same as I get without the FW.
Just wondering if it shows anything different when the FW is working and connected (4pin mode) ?