Hi all,
sorry for the stupid question above, but the problem was in front of the computer.
I will shorty describe, what I have done wrong and how it is configured now, probably it helps someone.

1. I created a profile containing only the mount and CCD (see picture 01_profile.png)
2. I started Ekos Driver and mount and CCD getting connected. And the Ekos windows is opened with all tabs for Setup, Scheduler, Mount, CCD, Focus, Align and Guide. (see picture 02_Ekos.png)
3. Then I go to CCD tab and configure the sequences. (03_CCD.png)
4. Then I changed to Guide Tab and I found, that my primary CCD is configured as guiding camera (and this confuses me) (04_Guide.png)
5. But this time I ignored this and opened the Options (lower right corner) for Guide. (05_configureGuide.png) Here I configured a very long "Non guide dither pulse" to see what happens.
6. Then I changed to Scheduler tab and configured my capture process. And here I did the next misconfiguration. I forgot to deactivate the guiding for every sequence (06_Schedule.png)

After setting this I was able to start the scheduler and the mount dithered between every picture.
CS,
Kay



Read More...