Hey Rob,

Firstly thank you for the build as I needed this to get the latest Indi Lib on my Mac.

I have tested this with my devices and all do connect as with the 3.5.2 and are operational, however I still have the same issue on both the Skyris 132c and the built in iGuider of the iOptron CEM70g where the pixel sizes are defaulting to 5.60.

I was informed that the latest INDI lib release should have these corrected but from your beta testing build, seems not. Unless it does not have the latest INDI release.

In the case of the Skyris 132c, the capture size is correct @1280 x 960 but the pixel size defaults to 5.60 (manufacturers is 3.75)
In the case of the iGuider, the capture size defaults to 640 x 960 (manufacturers is 1280 x 960) and the pixel size defaults to 5.60 (manufacturers is 3.75)

iGuider logs:
2021-05-05T09:27:50: [INFO] For future autodetection of pixel size, please report the following: Reported Name: iOptron iGuider: iOptron iGuide, Common Name (Eg: NexImage 10), Pixel Size to the following thread: bit.ly/2S1Vxjq
2021-05-05T09:27:50: [INFO] Setting pixel size to default of 5.60
2021-05-05T09:27:50: [INFO] Found initial Input "Camera 1", Format "YUYV 4:2:2", Size 640x960, Frame interval 1/18s

Skyris logs:
021-05-05T09:27:50: [INFO] For future autodetection of pixel size, please report the following: Reported Name: SKYRIS 132C, Common Name (Eg: NexImage 10), Pixel Size to the following thread: bit.ly/2S1Vxjq
2021-05-05T09:27:50: [INFO] Setting pixel size to default of 5.60
2021-05-05T09:27:50: [WARNING] Manual/auto exposure control is not possible on the device!
2021-05-05T09:27:50: [INFO] Found initial Input "Camera 1", Format "8-bit Bayer GRGR/BGBG", Size 1280x960, Frame interval 1/30s

I realise these are more a driver issue to contend with. Other than that, the new build from what I can see, runs well. Have not done a real environment test, just daytime indoor. Typical British weather I'm afraid.

Equipment I'm using are;
Mount - ioptron cem70g
built in iGuider
built in iPolar
Main ccd - ZWO asi183mc pro
Secondary ccd - Skyris 132c
Stellarmate+
and running on both the Stellarmate app with iPad
and kStars on macOS via hotspot or vnc viewer

thanks, Richard.

 

Read More...