Hi all 

I just upgraded form a DSLR to a ASI camera guide scope and filter wheel.

I am on 64 bit Kubuntu  20.04

I was on a slightly older version of indi and plugged everything in and the camera and guider connect but not the filter wheel. 

I then upgraded inid ekos /kstars to the latest, sudo apt-get install indi-full kstars-bleeding

Now the filter wheel is fine but the camera driver crashes as soon as I connect.  I have tried just the camera , alone  with no guide camera and visa versa noting it just consistently crashes now. 

 



lsusb below :
Bus 001 Device 002: ID 8087:8001 Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 03c3:260e ZWO ASI2600MM Pro
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 007: ID 04f2:b45d Chicony Electronics Co., Ltd Integrated Camera
Bus 002 Device 006: ID 8087:0a2a Intel Corp. 
Bus 002 Device 005: ID 138a:0017 Validity Sensors, Inc. VFS 5011 fingerprint sensor
Bus 002 Device 004: ID 04f3:012d Elan Microelectronics Corp. Touchscreen
Bus 002 Device 003: ID 03c3:1f01 ZW0 ZWO EFW
Bus 002 Device 010: ID 03c3:120c  
Bus 002 Device 009: ID 04b4:6572 Cypress Semiconductor Corp. Unprogrammed CY7C65642 hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


Any help would be greatly appreciated 

Regards
Cliff

Read More...