After further testing, I was unable to get sensor temperature to be controlled properly with the G21….

Read More...

OK, here's an update... I needed a second device to control a second mount, and since it's impossible to buy an rpi4 these days, I installed Debian Bullseye on an Intel NUC. Debian doesn't meet the dependency requirements to install kstars/ekos/indi from the ppa, so I used NOU's excellent scripts to build it myself (worked fist time, ). Just on a whim, I hooked up the LPI-G Advanced to the NUC, and the Meade Toupcam drivers properly recognized the camera and had the correct resolution...

So, works with self-built, but not with Astroberry 2.04 fully updated. Do I need to start over on the rpi4 and build my own with the pi, or is there something I should try to get it working with Astroberry?

Thanks,
Roscoe

Read More...

I know this is an old thread, but I can't get my LPI-G Advanced Mono working properly with the latest astroberry. INDI control panel finds the camera and recognizes it as "Toupcam Meade LPI-GM Advanced is online." but the Image Info tab lists max width as 1520 and max height as 1024, should be 3072x2048. Any way to get this working properly?

Thanks,
Roscoe

Read More...

I haven't had a clear night to image, but Astroberry seems to be talking to my G21 using the StarShootG drivers....

Roscoe

Read More...