No, I can not...but now for different reason. When the focuser is connected to the PI (it is the only device connected to a USB port...no hubs or any other device), a "Scan Ports" reveals 1 available port...which I assume to be /dev/tty0... but when I try to connect, the system reports port already in use by another device. When I issue lsusb at the terminal, the focuser is located at Bus 001 Device 003, but no indication of which /dev that is for setting the connection port.
As for the firmware level, I asked Primaluce support about the Play software upgrading the firmware from 3.1 to 3.05, and their response was:
"I confirm you that the latest firmware of SESTO SENSO 2/ESATTO focusers is version 3.05.01 that is later than 3.1.2 (that you can read as 3.01.02)."
Read More...
Correction...there appears to be no FIRMWARE downloadable from Primaluce site. I downloaded the "Software Package" 3.2 from the site. I had to use their "PLAY" software on a WIN machine in order to update the focuser firmware. When PLAY connected to the focuser it responded with "You must update the firmware...current version 3.1.2, new version 3.05.01". Clearly this is not an upgrade, but a downgrade, but the PLAY software mandated the change. So now I have firmware 3.05.01 which behaves exactly the same as the previous firmware and EKOS is not able to establish a connection.
Is there any other way to find and update the firmware on this thing?
Thanks again
Read More...
First off, thankyou so very much for your work in this community!!
Primaluce Website shows latest Sesto Senso firmware as 3.2. So, I can try that one at least since it does not work anyway. Perhaps they will upload 3.3 in the next few weeks?
Regards,
Forrest
Read More...
In frustration, I contacted Primluce Labs and this was their response:
"I'm sorry but INDI drivers are not developed by us so please send a notification to INDI developers so they can update it and you will be able to use SESTO SENSO 2 with INDI.
We do not suggest to make a firmware downgrade since this could bring to malfunctions."
Are there any other work-arounds or is this a lost cause?
Read More...
My just New Sesto Sense came with firmware 3.1.12 and will not connect at all! All attempts with any USB port and auto-search enabled return nothing to the log. "Connect" button goes green, but nothing ever happens.
I have a fresh install of both Astroberry and libindi on RPi-4, Buster. Everything else connects fine, but not the focuser.
Detail logs look like there is a "connection", but the handshake never happens and that's it...
Read More...
My just New Sesto Sense came with firmware 3.1.12 and will not connect at all! All attempts with any USB port and auto-teach enabled return nothing to the log. "Connect" button goes green, but nothing ever happens.
I have a fresh install of both Astroberry and libindi on RP Buster 64
Everything else connects fine, but not the focuser
Read More...