Hi, i have find a little bug when rise the meridian flip rutine:

Tonight i was capturing a 2x4 mosaic repeating all jobs 5 times, over NGC7000.

At 04:46 hour, start the meridian flip,
2023-07-07T04:37:11 Meridian flip completed.
2023-07-07T04:36:18 Meridian flip running...
2023-07-07T04:36:17 Meridian flip ready to start...

just when finish the last part from mosaic in 3rd iteration like said this log:
2023-07-07T04:36:18 No jobs left in the scheduler queue.
2023-07-07T04:36:17 Job 'NGC7000-Part_8' is complete.
2023-07-07T04:26:09 Job 'NGC7000-Part_8' capture is in progress...

During meridian flips working, the scheduler start the 4 iteration, and display a error from 4 parts:
2023-07-07T04:36:30 Job 'NGC7000-Part_4' is terminated due to errors.
2023-07-07T04:36:30 Warning: job 'NGC7000-Part_4' slew failed, marking terminated due to errors.
2023-07-07T04:36:29 Job 'NGC7000-Part_4' is slewing to target.
2023-07-07T04:36:27 Job 'NGC7000-Part_3' is terminated due to errors.
2023-07-07T04:36:27 Warning: job 'NGC7000-Part_3' slew failed, marking terminated due to errors.
2023-07-07T04:36:26 Job 'NGC7000-Part_3' is slewing to target.
2023-07-07T04:36:24 Job 'NGC7000-Part_2' is terminated due to errors.
2023-07-07T04:36:24 Warning: job 'NGC7000-Part_2' slew failed, marking terminated due to errors.
2023-07-07T04:36:23 Job 'NGC7000-Part_2' is slewing to target.
2023-07-07T04:36:21 Job 'NGC7000-Part_1' is terminated due to errors.
2023-07-07T04:36:21 Warning: job 'NGC7000-Part_1' slew failed, marking terminated due to errors.
2023-07-07T04:36:20 Job 'NGC7000-Part_1' is slewing to target.
2023-07-07T04:36:18 Starting job sequence iteration #4

when meridian flip complete, slew the part5 and start capture procedure:
2023-07-07T04:39:25 Job 'NGC7000-Part_5' capture is in progress...
2023-07-07T04:39:25 Job 'NGC7000-Part_5' guiding is in progress.
2023-07-07T04:37:48 Starting guiding procedure for NGC7000-Part_5 ...
2023-07-07T04:37:47 Job 'NGC7000-Part_5' repositioning is complete.
2023-07-07T04:37:47 Job 'NGC7000-Part_5' alignment is complete.
2023-07-07T04:37:11 Job 'NGC7000-Part_5' is capturing and plate solving.
2023-07-07T04:37:11 Job 'NGC7000-Part_5' slew is complete.
2023-07-07T04:36:32 Job 'NGC7000-Part_5' is slewing to target.

@Wolfgang,
@Hy Murveit
Please, can you check this? maybe can be a possible bug.

Thanks,
Regards.

Read More...