Bi-monthly release with minor bug fixes and improvements
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Could NOT find Libev (missing: LIBEV_LIBRARY LIBEV_INCLUDE_DIR)
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
[WARNING] Invalid response, check connection
[WARNING] Communication :Ft# error, check connection.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
indiserver -vv indi_simulator_ccd indi_lx200_OnStep
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
int ft_error = getCommandIntResponse(PortFD, &focus_T_int, focus_T, ":Ft#");
if (ft_error > 0)
{
FocuserTN[0].value = atof(focus_T);
IDSetNumber(&FocuserTNP, nullptr);
LOGF_DEBUG("focus T°: %s, %i fi_error: %i", focus_T, focus_T_int, ft_error); //typo
}
else
int ft_error = getCommandIntResponse(PortFD, &focus_T_int, focus_T, ":Ft#");
if (ft_error > 0)
{
FocuserTN[0].value = atof(focus_T);
IDSetNumber(&FocuserTNP, nullptr);
LOGF_DEBUG("focus T°: %s, %i ft_nbcar: %i", focus_T, focus_T_int, ft_error); //typo
}
else
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
<defSwitchVector device="LX200 OnStep" name="TELESCOPE_SLEW_RATE" label="Slew Rate" group="Motion Control" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2023-03-26T19:25:03">
<defSwitch name="0" label="0.25x">
Off
</defSwitch>
<defSwitch name="1" label="0.5x">
Off
</defSwitch>
<defSwitch name="2" label="1x">
Off
</defSwitch>
<defSwitch name="3" label="2x">
Off
</defSwitch>
<defSwitch name="4" label="4x">
Off
</defSwitch>
<defSwitch name="5" label="8x">
On
</defSwitch>
<defSwitch name="6" label="24x">
Off
</defSwitch>
<defSwitch name="7" label="48x">
Off
</defSwitch>
<defSwitch name="8" label="Half-Max">
Off
</defSwitch>
<defSwitch name="9" label="Max">
Off
</defSwitch>
</defSwitchVector>
<defSwitchVector device="LX200 OnStep" name="TELESCOPE_SLEW_RATE" label="Slew Rate" group="Motion Control" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2023-03-26T19:25:04">
<defSwitch name="1x" label="1x">
Off
</defSwitch>
<defSwitch name="2x" label="2x">
Off
</defSwitch>
<defSwitch name="3x" label="3x">
Off
</defSwitch>
<defSwitch name="4x" label="4x">
Off
</defSwitch>
<defSwitch name="5x" label="5x">
Off
</defSwitch>
<defSwitch name="6x" label="6x">
On
</defSwitch>
<defSwitch name="7x" label="7x">
Off
</defSwitch>
<defSwitch name="8x" label="8x">
Off
</defSwitch>
<defSwitch name="9x" label="9x">
Off
</defSwitch>
<defSwitch name="10x" label="10x">
Off
</defSwitch>
</defSwitchVector>
Please Log in or Create an account to join the conversation.