Telescopes: All Listings 

Filter listings...
SkyWatcher Synscan

skywatcher.com

Installation INDI Synscan Driver is installed by default with INDI. To Install the driver under Ubuntu: sudo apt-add-repository ppa:mutlaqja/ppa sudo apt-get update && sudo apt-get install indi-bin Features The driver can control any moun ...

Category:Telescopes

IEQPro/CEM60

0 reviews
IEQPro/CEM60

www.ioptron.com

Installation Included with libindi v1.0+. To install it under Ubuntu: sudo apt-add-repository ppa:mutlaqja/ppa sudo apt-get update && sudo apt-get install libindi1 Features The driver supports the following iEQ mounts: CEM60 (Firmw ...

Category:IOptron

Autostar

0 reviews
Autostar

Installation lx200autostar is the generic driver for all Autostar based telescopes. Almost all other Meade drivers are derived from the Autostar driver. You can use the lx200autostar driver with any of the ETX, LX50, LX90, or LX200 series telescopes. ...

Category:Meade

LX200 Classic

0 reviews
LX200 Classic

Installation lx200classic is included with INDI v0.2+ Features The lx200classic supports functions that were removed with the introduction of Autostar: Ability to read object name from controller. Setting Max Slew Rate. ...

Category:Meade

LX200 GPS

0 reviews
LX200 GPS

Installation lx200gps is included with INDI v0.4+. Features The lx200gps supports many extended features over the conventional Autostar based telescope. The lx200gps driver specfically supports: GPS Power Control. GPS Statu ...

Category:Meade

LX200 16

0 reviews
LX200 16

Installation TODO Features TODO Operation TODO Issues There are no known bugs for this driver. If you found a bug, please report it at INDI's bug tracking system at SourceForge. (You can log in with a variety of e ...

Category:Meade
Celestron NexStar

www.celestron.com

Installation Included with libindi v1.6+. For Ubuntu it is recommended to install the latest stable version: sudo apt-add-repository ppa:mutlaqja/ppa sudo apt-get update && sudo apt-get install libindi Features This driver supports Cele ...

Category:Celestron

EQ-6 MCU Update

0 reviews
EQ-6 MCU Update

Installation lx200basic is included with INDI v0.6+ Features The LX200 Basic supports most functions of the EQ-6 MCU Update: Project Website Project Support and Community Operation It works with all firmware ...

Category:Telescopes

HEQ-5 MCU Update

0 reviews
HEQ-5 MCU Update

Installation lx200basic is included with INDI v0.6+. Features The LX200 Basic supports most functions of the HEQ-5 MCU Update: Project Website Project Support and Community Operation It works with all firmware ...

Category:Telescopes
LittleFoot Vpower

Installation lx200basic is included with INDI v0.6+ Features The LX200 Basic supports basic functions of the LittleFoot Vpower: Project Website Project Support and Community Operation It works with all firmwar ...

Category:Telescopes
LittleFoot Elegance Photo

Installation lx200basic is included with INDI v0.6+. Features The LX200 Basic supports basic functions of the LFE Photo: Project Website Project Support and Community Operation It works with all firmware ve ...

Category:Telescopes
Astro-Electronic FS-2

Installation lx200fs2 is included with INDI v0.8+. Features There are no extra features for this driver. Operation It only works with firmware versions 1.19 and higher, because needs to support ACK command. However version 1.2 ...

Category:Telescopes
EQMod

www.indlib.org

Installation INDI EQMod Driver is released as a 3rd party driver and requires INDI Library >= v0.9.7. To Install the driver under Ubuntu: sudo apt-add-repository ppa:mutlaqja/ppa sudo apt-get update && sudo apt-get install indi-eqmod Fe ...

Category:Telescopes

ZEQ25/SmartEQ

0 reviews
ZEQ25/SmartEQ

www.ioptron.com

Installation Included with libindi v1.2+. To install it under Ubuntu: sudo apt-add-repository ppa:mutlaqja/ppa sudo apt-get update && sudo apt-get install libindi1 Features The driver supports the following mounts: ZEQ 25 SmartEQ ...

Category:IOptron

Pulsar2

0 reviews
Pulsar2

www.geminitelescope.com

Installation Included with libindi v1.2+. To install it under Ubuntu: sudo apt-add-repository ppa:mutlaqja/ppa sudo apt-get update && sudo apt-get install libindi1 Features The driver supports the Gemini Pulsar 2 and the Pulsar contro ...

Category:Telescopes

SkySensor2000PC

0 reviews
SkySensor2000PC

www.vixenamerica.com

Installation INDI SkySensor2000PC telescope driver is included with INDI v1.2+ Features This driver supports the SkySensor2000PC telescope contoller using the LX200 compatible protocol. The driver is similar to the LX200 driver but ...

Category:Telescopes

Takahashi Temma

0 reviews
Takahashi Temma

www.takahashiamerica.com

Installation Included with libindi v1.6+. To install it under Ubuntu: sudo apt-add-repository ppa:mutlaqja/ppa sudo apt-get update && sudo apt-get install libindi1 Features The driver supports Takahashi Temma mounts. Basic functions such ...

Category:Telescopes

10 Micron

0 reviews
10 Micron

www.10micron.eu

Installation The INDI 10Micron driver is included with libindi v1.3+. For Ubuntu it is recommended to install the latest development version: sudo apt-add-repository ppa:mutlaqja/ppa sudo apt-get update && sudo apt-get install indi-full Fe ...

Category:Telescopes
Celestron NexStar Evolution

www.celestron.com

Installation indi_nexstarevo in included with indi-full by default. It is a separate driver and can be installed from the indi-nexstarevo package. You can install release version of the driver from the main INDI PPA, and the development versio ...

Category:Celestron

Losmandy Gemini

0 reviews
Losmandy Gemini

www.losmandy.com

Installation INDI Gemini/Gemini2 Driver is is included by default with INDI Library v1.0+. Under Ubuntu, you can install it via: sudo add-apt-repository ppa:mutlaqja/ppa sudo apt-get update sudo apt-get install indi-bin Features This driver cont ...

Category:Telescopes