Hi There,

when trying to control my mount from Astroberry it seems to get caught in a loop of utter failure when trying to connect.

here is the output from the indi control panel;


2023-11-01T22:50:33: [INFO] Retrying...
2023-11-01T22:50:33: [ERROR] Bad connection. Trying to reconnect.
2023-11-01T22:50:06: [INFO] Retrying...
2023-11-01T22:49:51: [INFO] Connecting to PMC8 via Serial. Autodecting cable type. This could take up to 30 seconds.
2023-11-01T22:49:51: [INFO] ES EXOS2-GT PMC-Eight is offline.
2023-11-01T22:49:50: [INFO] ES EXOS2-GT PMC-Eight is online.
2023-11-01T22:49:50: [WARNING] Connected to PMC8 using a standard-configured FTDI cable.Your mount will reset and lose its position anytime you disconnect and reconnect.See indilib.org/devices/telescopes/explore-s...tific-g11-pmc-eight/
2023-11-01T22:49:50: [INFO] Retrying...

this mount has worked with EKOS and kstars in the past on my laptop running under Ubuntu, can anyone shed a little light please?

Cheers,

Matt

As far as we know, Astroberry is no longer an active project. You can take a look here for ideas:

www.indilib.org/forum/astroberry/12390-6...roberry.html?start=0

Matt have a look at this indilib.org/forum/general/12964-astroarc...for-arm64.html#90118 or checkout Stellarmate for something that's more up to date.

Alan