Bi-monthly release with minor bug fixes and improvements
DEBUG 872.603872 sec : JD: 2.45927e+06 - MSD: 10.3856
DEBUG 872.603930 sec : MC.x: 0 - MC.y: 0 MC.z: 0.45
DEBUG 872.603951 sec : HA: -10.8922 Lng: 10.8328 RA: 330
DEBUG 872.603965 sec : Active Snoop, driver: LX200 10micron, property: TELESCOPE_PIER_SIDE
DEBUG 872.603982 sec : OTA_SIDE: 1
DEBUG 872.603996 sec : OTA_OFFSET: 1 Lat: 49.8328
DEBUG 872.604009 sec : OC.x: 0.958235 - OC.y: -0.218538 OC.z: 0.265535
DEBUG 872.604026 sec : Mount Az: 2.74314 Alt: 43.0684
DEBUG 872.604040 sec : OV.x: 0.0349626 - OV.y: 0.729702 OV.z: 0.68287
DEBUG 872.604060 sec : Calculated target azimuth is 29.88. MinAz: 4.78, MaxAz: 54.98
INFO 872.604073 sec : Dome is moving to position 29.88 degrees azimuth...
DEBUG 872.604109 sec : Dome is syncing to position 29.88 degrees...
INFO 902.046243 sec : Dome reached requested azimuth angle.
DEBUG 902.539657 sec : JD: 2.45927e+06 - MSD: 10.394
DEBUG 902.539715 sec : MC.x: 0 - MC.y: 0 MC.z: 0.45
DEBUG 902.539738 sec : HA: -10.8837 Lng: 10.8328 RA: 329.999
DEBUG 902.539751 sec : Active Snoop, driver: LX200 10micron, property: TELESCOPE_PIER_SIDE
DEBUG 902.539768 sec : OTA_SIDE: 1
DEBUG 902.539782 sec : OTA_OFFSET: 1 Lat: 49.8328
DEBUG 902.539795 sec : OC.x: 0.957603 - OC.y: -0.22015 OC.z: 0.264175
DEBUG 902.539812 sec : Mount Az: 2.76338 Alt: 43.0728
DEBUG 902.539826 sec : OV.x: 0.0352179 - OV.y: 0.729638 OV.z: 0.682927
DEBUG 902.539845 sec : Calculated target azimuth is 29.89. MinAz: 4.78, MaxAz: 54.99
DEBUG 903.696934 sec : JD: 2.45927e+06 - MSD: 10.3943
DEBUG 903.696951 sec : MC.x: 0 - MC.y: 0 MC.z: 0.45
DEBUG 903.696956 sec : HA: -10.8834 Lng: 10.8328 RA: 329.999
DEBUG 903.696959 sec : OTA_SIDE: -1
DEBUG 903.696962 sec : OTA_OFFSET: 1 Lat: 49.8328
DEBUG 903.696965 sec : OC.x: -0.957578 - OC.y: 0.220212 OC.z: 0.635877
DEBUG 903.696969 sec : Mount Az: 2.76413 Alt: 43.073
DEBUG 903.696972 sec : OV.x: 0.0352272 - OV.y: 0.729634 OV.z: 0.68293
DEBUG 903.696977 sec : Calculated target azimuth is 335.31. MinAz: 309.91, MaxAz: 0.72
INFO 903.696980 sec : Dome is moving to position 335.31 degrees azimuth...
DEBUG 903.696988 sec : Dome is syncing to position 335.31 degrees...
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
DEBUG 902.539768 sec : OTA_SIDE: 1
DEBUG 903.696959 sec : OTA_SIDE: -1
setPierSide((toupper(Ginfo.SideOfPier) == 'E') ? INDI::Telescope::PIER_EAST : INDI::Telescope::PIER_WEST);
OTASideSP.s == IPS_OK
OTASideSP.s
IPS_OK
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
LOGF_DEBUG("HA: %g Lng: %g RA: %g", hourAngle, observer.lng, mountEquatorialCoords.ra);
// this will have state OK if the mount sent us information
// and it will be IDLE if not
if(CanAbsMove() && OTASideSP.s == IPS_OK)
{
// process info from the mount
if(OTASideS[0].s == ISS_ON) OTASide = -1;
else OTASide = 1;
}
else
{
// figure out the pier side without help from the mount
if(hourAngle > 0) OTASide = -1;
else OTASide = 1;
// if we got here because we turned off the PIER_SIDE switches in a target goto
// lets try get it back on
if (CanAbsMove())
triggerSnoop(ActiveDeviceT[0].text, "TELESCOPE_PIER_SIDE");
}
OpticalCenter(MountCenter, OTASide * DomeMeasurementsN[DM_OTA_OFFSET].value, observer.lat, hourAngle, OptCenter);
LOGF_DEBUG("OTA_SIDE: %d", OTASide);
LOGF_DEBUG("OTA_OFFSET: %g Lat: %g", DomeMeasurementsN[DM_OTA_OFFSET].value, observer.lat);
LOGF_DEBUG("OC.x: %g - OC.y: %g OC.z: %g", OptCenter.x, OptCenter.y, OptCenter.z);
// process info from the mount
if(OTASideS[0].s == ISS_ON) OTASide = -1;
else OTASide = 1;
// process info from the mount
if(OTASideS[0].s == ISS_ON) OTASide = 1;
else OTASide = -1;
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.