I've applied all the updates described in the past several posts, and now, when I select Rotator Mini, EKOS fails to connect with the rotator AND my mount (HEM15).
If I select Rotator Lite, it will connect to the rotator, but not to my mount.
I guess I need to reset things? Man, I'm just so not used to this environment...
The driver logs show that your rotator firmware is from last year, so you really need to update that and see if it makes any difference.
Download the latest firmware from the Wanderer site, go to the download location and use the avrdude command I provided earlier (make sure to look up the correct port in the system log and also substitute the firmware file name to the one you will have downloaded).
Can Ekos connect to your mount when you don't select any rotator at all?
@Satoru Edit your equipment profile and check "Port Selector". Next time you start the profile, it will wait until you select the ports for each device before you connect all. This will ensure there is no port conflict.