Hi,
I had the Stellarmate solving fine a few days ago and did an update tonight before I went out and now there's no solving taking place.
Checked through he settings and can't see anything different.
Any Ideas Folks.
Campbell  2021-03-19T22:00:46 Solver Failed.2021-03-19T22:00:46 Solver was aborted, timed out, or failed, so no solution was found2021-03-19T22:00:39 Starting Internal StellarSolver Astrometry.net based Engine with the 4-SmallScaleSolving profile. . .2021-03-19T22:00:39 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2021-03-19T22:00:39 Image width 1280 pixels; arcsec per pixel range: 1.935 to 3.872021-03-19T22:00:39 Scale range: 41.28 to 82.56 arcmin wide2021-03-19T22:00:39 Configuring StellarSolver2021-03-19T22:00:39 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2021-03-19T22:00:39 Stars Found after Filtering: 502021-03-19T22:00:39 Keeping just the 50 brightest stars2021-03-19T22:00:39 Removing the stars with a/b ratios greater than 1.52021-03-19T22:00:39 Stars Found before Filtering: 672021-03-19T22:00:39 Starting Internal StellarSolver Sextractor with the 4-SmallScaleSolving profile . . .2021-03-19T22:00:39 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2021-03-19T22:00:39 There should be enough RAM to load the indexes in parallel.2021-03-19T22:00:39 Note: Free RAM for now is reported as Installed RAM on MacOS until I figure out how to get available RAM2021-03-19T22:00:39 Evaluating Installed RAM for inParallel Option. Total Size of Index files: 2.57944 GB, Installed RAM: 16 GB, Free RAM: 16 GB2021-03-19T22:00:39 Automatically downsampling the image by 12021-03-19T22:00:39 StellarSolver only uses the Internal SEP Sextractor since it doesn't save files to disk. Changing to Internal Sextractor.2021-03-19T22:00:39 Image received.2021-03-19T22:00:35 Capturing image...2021-03-19T21:59:52 Solver Failed.2021-03-19T21:59:52 Solver was aborted, timed out, or failed, so no solution was found2021-03-19T21:59:36 Starting Internal StellarSolver Astrometry.net based Engine with the 4-SmallScaleSolving profile. . .2021-03-19T21:59:36 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2021-03-19T21:59:36 Image width 1280 pixels; arcsec per pixel range: 1.935 to 3.872021-03-19T21:59:36 Scale range: 41.28 to 82.56 arcmin wide2021-03-19T21:59:36 Configuring StellarSolver2021-03-19T21:59:36 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2021-03-19T21:59:36 Stars Found after Filtering: 502021-03-19T21:59:36 Keeping just the 50 brightest stars2021-03-19T21:59:36 Removing the stars with a/b ratios greater than 1.52021-03-19T21:59:36 Stars Found before Filtering: 702021-03-19T21:59:36 Starting Internal StellarSolver Sextractor with the 4-SmallScaleSolving profile . . .2021-03-19T21:59:36 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2021-03-19T21:59:36 There should be enough RAM to load the indexes in parallel.2021-03-19T21:59:36 Note: Free RAM for now is reported as Installed RAM on MacOS until I figure out how to get available RAM2021-03-19T21:59:36 Evaluating Installed RAM for inParallel Option. Total Size of Index files: 2.57944 GB, Installed RAM: 16 GB, Free RAM: 16 GB2021-03-19T21:59:36 Automatically downsampling the image by 12021-03-19T21:59:36 Image received.2021-03-19T21:59:32 Capturing image...2021-03-19T21:58:24 Solver Failed.2021-03-19T21:58:24 Solver was aborted, timed out, or failed, so no solution was found2021-03-19T21:57:59 Starting Internal StellarSolver Astrometry.net based Engine with the 4-SmallScaleSolving profile. . .2021-03-19T21:57:59 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2021-03-19T21:57:59 Image width 1280 pixels; arcsec per pixel range: 1.935 to 3.872021-03-19T21:57:59 Scale range: 41.28 to 82.56 arcmin wide2021-03-19T21:57:59 Configuring StellarSolver2021-03-19T21:57:59 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2021-03-19T21:57:59 Stars Found after Filtering: 502021-03-19T21:57:59 Keeping just the 50 brightest stars2021-03-19T21:57:59 Removing the stars with a/b ratios greater than 1.52021-03-19T21:57:59 Stars Found before Filtering: 792021-03-19T21:57:59 Starting Internal StellarSolver Sextractor with the 4-SmallScaleSolving profile . . .2021-03-19T21:57:59 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2021-03-19T21:57:59 There should be enough RAM to load the indexes in parallel.2021-03-19T21:57:59 Note: Free RAM for now is reported as Installed RAM on MacOS until I figure out how to get available RAM2021-03-19T21:57:59 Evaluating Installed RAM for inParallel Option. Total Size of Index files: 2.57944 GB, Installed RAM: 16 GB, Free RAM: 16 GB2021-03-19T21:57:59 Automatically downsampling the image by 12021-03-19T21:57:59 Image received.2021-03-19T21:57:56 Capturing image...2021-03-19T21:56:57 Solver Failed.2021-03-19T21:56:57 Solver was aborted, timed out, or failed, so no solution was found2021-03-19T21:56:50 Starting Internal StellarSolver Astrometry.net based Engine with the 4-SmallScaleSolving profile. . .2021-03-19T21:56:50 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2021-03-19T21:56:50 Image width 1280 pixels; arcsec per pixel range: 1.935 to 3.872021-03-19T21:56:50 Scale range: 41.28 to 82.56 arcmin wide2021-03-19T21:56:49 Configuring StellarSolver2021-03-19T21:56:49 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2021-03-19T21:56:49 Stars Found after Filtering: 502021-03-19T21:56:49 Keeping just the 50 brightest stars2021-03-19T21:56:49 Removing the stars with a/b ratios greater than 1.52021-03-19T21:56:49 Stars Found before Filtering: 652021-03-19T21:56:49 Starting Internal StellarSolver Sextractor with the 4-SmallScaleSolving profile . . .2021-03-19T21:56:49 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2021-03-19T21:56:49 There should be enough RAM to load the indexes in parallel.2021-03-19T21:56:49 Note: Free RAM for now is reported as Installed RAM on MacOS until I figure out how to get available RAM2021-03-19T21:56:49 Evaluating Installed RAM for inParallel Option. Total Size of Index files: 2.57944 GB, Installed RAM: 16 GB, Free RAM: 16 GB2021-03-19T21:56:49 Automatically downsampling the image by 12021-03-19T21:56:49 Image received.2021-03-19T21:56:45 Capturing image...2021-03-19T21:52:26 Solver Failed.2021-03-19T21:52:26 Solver was aborted, timed out, or failed, so no solution was found2021-03-19T21:52:14 Starting Internal StellarSolver Astrometry.net based Engine with the 4-SmallScaleSolving profile. . .2021-03-19T21:52:14 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2021-03-19T21:52:14 Image width 1280 pixels; arcsec per pixel range: 1.935 to 3.872021-03-19T21:52:14 Scale range: 41.28 to 82.56 arcmin wide2021-03-19T21:52:14 Configuring StellarSolver2021-03-19T21:52:14 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2021-03-19T21:52:14 Stars Found after Filtering: 502021-03-19T21:52:14 Keeping just the 50 brightest stars2021-03-19T21:52:14 Removing the stars with a/b ratios greater than 1.52021-03-19T21:52:14 Stars Found before Filtering: 622021-03-19T21:52:14 Starting Internal StellarSolver Sextractor with the 4-SmallScaleSolving profile . . .2021-03-19T21:52:14 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2021-03-19T21:52:14 There should be enough RAM to load the indexes in parallel.2021-03-19T21:52:14 Note: Free RAM for now is reported as Installed RAM on MacOS until I figure out how to get available RAM2021-03-19T21:52:14 Evaluating Installed RAM for inParallel Option. Total Size of Index files: 2.57944 GB, Installed RAM: 16 GB, Free RAM: 16 GB2021-03-19T21:52:14 Automatically downsampling the image by 12021-03-19T21:52:14 Image received.2021-03-19T21:52:10 Capturing image...2021-03-19T21:48:19 Solver Failed.2021-03-19T21:48:19 There is no astrometry solver at /usr/local/bin/solve-field, Aborting2021-03-19T21:48:19 There should be enough RAM to load the indexes in parallel.2021-03-19T21:48:19 Note: Free RAM for now is reported as Installed RAM on MacOS until I figure out how to get available RAM2021-03-19T21:48:19 Evaluating Installed RAM for inParallel Option. Total Size of Index files: 2.57944 GB, Installed RAM: 16 GB, Free RAM: 16 GB2021-03-19T21:48:19 Automatically downsampling the image by 32021-03-19T21:48:19 Image received.2021-03-19T21:47:35 Capturing image...2021-03-19T21:45:27 Solver Failed.2021-03-19T21:45:27 Solver was aborted, timed out, or failed, so no solution was found2021-03-19T21:45:16 Starting Internal StellarSolver Astrometry.net based Engine with the 4-SmallScaleSolving profile. . .2021-03-19T21:45:16 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2021-03-19T21:45:16 Image width: 4758 pixels, Downsampled Image width: 1586 pixels; arcsec per pixel range: 2.36769 to 5.330662021-03-19T21:45:16 Scale range: 62.586 to 140.907 arcmin wide2021-03-19T21:45:16 Configuring StellarSolver2021-03-19T21:45:16 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2021-03-19T21:45:16 Stars Found after Filtering: 502021-03-19T21:45:16 Keeping just the 50 brightest stars2021-03-19T21:45:16 Removing the stars with a/b ratios greater than 1.52021-03-19T21:45:16 Stars Found before Filtering: 982021-03-19T21:45:16 Starting Internal StellarSolver Sextractor with the 4-SmallScaleSolving profile . . .2021-03-19T21:45:16 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2021-03-19T21:45:16 There should be enough RAM to load the indexes in parallel.2021-03-19T21:45:16 Note: Free RAM for now is reported as Installed RAM on MacOS until I figure out how to get available RAM2021-03-19T21:45:16 Evaluating Installed RAM for inParallel Option. Total Size of Index files: 2.57944 GB, Installed RAM: 16 GB, Free RAM: 16 GB2021-03-19T21:45:16 Automatically downsampling the image by 32021-03-19T21:45:16 Image received.2021-03-19T21:44:31 Capturing image...2021-03-19T21:43:58 Solver Failed.2021-03-19T21:43:58 Solver was aborted, timed out, or failed, so no solution was found2021-03-19T21:43:55 Starting Internal StellarSolver Astrometry.net based Engine with the 4-SmallScaleSolving profile. . .2021-03-19T21:43:55 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2021-03-19T21:43:55 Image width 1280 pixels; arcsec per pixel range: 2.89481 to 6.5142021-03-19T21:43:55 Scale range: 61.7559 to 138.965 arcmin wide2021-03-19T21:43:55 Configuring StellarSolver2021-03-19T21:43:55 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2021-03-19T21:43:55 Stars Found after Filtering: 502021-03-19T21:43:55 Keeping just the 50 brightest stars2021-03-19T21:43:55 Removing the stars with a/b ratios greater than 1.52021-03-19T21:43:55 Stars Found before Filtering: 872021-03-19T21:43:55 Starting Internal StellarSolver Sextractor with the 4-SmallScaleSolving profile . . .2021-03-19T21:43:55 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2021-03-19T21:43:55 There should be enough RAM to load the indexes in parallel.2021-03-19T21:43:55 Note: Free RAM for now is reported as Installed RAM on MacOS until I figure out how to get available RAM2021-03-19T21:43:55 Evaluating Installed RAM for inParallel Option. Total Size of Index files: 2.56247 GB, Installed RAM: 16 GB, Free RAM: 16 GB2021-03-19T21:43:55 Automatically downsampling the image by 12021-03-19T21:43:55 Image received.2021-03-19T21:43:50 Capturing image...2021-03-19T21:34:37 Solver Failed.2021-03-19T21:34:37 Solver was aborted, timed out, or failed, so no solution was found2021-03-19T21:34:32 Starting Internal StellarSolver Astrometry.net based Engine with the 4-SmallScaleSolving profile. . .2021-03-19T21:34:32 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2021-03-19T21:34:32 Image width 1280 pixels; arcsec per pixel range: 1.93373 to 3.867472021-03-19T21:34:32 Scale range: 41.2528 to 82.506 arcmin wide2021-03-19T21:34:32 Configuring StellarSolver2021-03-19T21:34:32 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2021-03-19T21:34:32 Stars Found after Filtering: 502021-03-19T21:34:32 Keeping just the 50 brightest stars2021-03-19T21:34:32 Removing the stars with a/b ratios greater than 1.52021-03-19T21:34:32 Stars Found before Filtering: 752021-03-19T21:34:32 Starting Internal StellarSolver Sextractor with the 4-SmallScaleSolving profile . . .2021-03-19T21:34:32 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++2021-03-19T21:34:32 There should be enough RAM to load the indexes in parallel.2021-03-19T21:34:32 Note: Free RAM for now is reported as Installed RAM on MacOS until I figure out how to get available RAM2021-03-19T21:34:32 Evaluating Installed RAM for inParallel Option. Total Size of Index files: 2.56247 GB, Installed RAM: 16 GB, Free RAM: 16 GB2021-03-19T21:34:32 Automatically downsampling the image by 12021-03-19T21:34:32 Image received.
 
 

That DEC value on your screen, 00:00:00, is pretty suspicious.
Perhaps try going to the align options and setting "Use Position" to be unchecked?

You Sharp eyed hawk, That certainly got things moving and it appeared to reach a solution but not a real one. The RA turns but not the Dec, spent 3 hours trying to figure this one out.
Thanks