Hello to all,
I a problem with my using my qhy183 and cfw3 wheel.
I see that filter change hangs on the CFW3 INDI panel, if i try to manually change filter or if I use a Capture sequence
This occour with KStars 3.6.6 of the end of August and also with latest 3.6.7
No problems if I use my 3.6.6 2023-08-01.
Updates has been applied startin from KStars 3.6.6 2023-08-01 with apt update and dist-upgrade commands.
I also tried with latest QHY sdk 23.10.11 but same problem
Now seems that it works, if i do updates from Kstars 3.6.6 2023-08-01 to latest 3.6.7 without the intermediate 3.6.6 of the end of August. Very strange
Filter changes have gone wonky on my QHY600 in the past - when I change it hangs - if I change again to same filter it appears to work. It was due to the wheel itself being stuck - I had to open the blue metal cover and prod the spring to un jam it - then it started working OK again.
In my case is not a hardware fail, but is related to software. I do not know what, but this is the motive that I have multiple sd card with differents images loaded