Hello, from the focuser tab the only thing I can change is the sinc. When I change the value of sinc, this is automatically written in absolute position and when I set the absolute value, the focuser moves. If I try to reverse the direction it does not work, it only moves in one direction. Is it possible that I have to set the values with the supplied software for windows and then save them in the sixth sense internal memory before using it with Ekos?

If you move to position 5000, then to 4000, it doesn't reverse direction?

Hi Jasem, I reread all the previous messages on this topic well and tried to initialize the sesto senso with the supplied Primalucelab software as rightly suggested by Lichtagent. Now it works well with Ekos, but I have not tried setting the minimum and maximum position limits yet. I will let you know for this new function that you have recently added. Thank you all for the excellent work.

Hi all,
I have the same problem ...each time I switch off the "sento senso", Ekos forget the endpoint and replace it by the current position value . I use a PC (nuc Intel) under Ubuntu 18.04.

Only solution : connect it under Win10, and make a new "calibration"...
Is there another work around ?

Thanks a lot.
Regards,

That's fixed by latest GIT and nightly PPA.

Thank you Jasem. I'll search how to update from git or nightly ppa.

And...congrats and thanks a lot for the great job you do on Indi !

Best Regards,

Any update on this. I have the same problem. It works if you do the configuration process first using the Prima Luce app.

I have the same issue where the sesto senso forgets its position after being powered off and back on.

What is the latest release of the Indi driver for Raspberry Pi running Ubuntu KStars/Ekos

Instructions here: indilib.org/download/ubuntu.html

They should be merged back into stable in about ~2 weeks.

Thank you very much.

Is there a reason why the temperature sensor isn't shown anymore?

Thanks Jasem,

I have similar issues with my SestoSenso... Please advise when the new driver become stable and how to install it overwriting the current already installed.

Paco L.

Hi

Is this merged back into stable yet?
I cannot get the driver to work consistently.

Regards

Rishi