I use Ekos to shoot the pictures. PHD2 for Guiding.
I choosed PHD2 as the Guiding Software in Ekos.
In PHD2 I choosed Dither 1 time- it means 1 time the value of Ekos (5)?
Nevertheless PHD2 is not dithering
What is wrong
I checked and dithering was working *however* there was an issue that was causing the graph to reset at least so this is now
fixed in GIT
. But PHD2 was dithering normally.
You need to run a session with Guide logging enabled and then share the logs. We'll see if there is anything amiss with Dither communication with PHD2.
When I used Phd2 for guiding long time ago I stumbled also over this behaviour. If I remember correctly you first have to start PHD2 then Kstars (or maybe the other way round). And you have to look in the "guiding" tab that guiding is "connected", sometimes you have to klick on the "connect" button.
Now I use the build-in guider and I'm happy with it.