OnStep with <strong>OnStepX 10.03k</strong>
I am starting testing OnSteX and even if things seem to work so far there is an annoying thing with polling.
The polling interval stays at 16s whatever setting I use under "Options" "Polling Period".
The same driver does behave normally with <strong>OnStep 4.24j</strong> polling 1s or even 500ms if I want.
I would like to know if somebody else observed this or is working on that issue before I start changing the code.
here the log and in orange the long time after cmdDatehhmmsssecondsdelta stotal s
Date hh mm ss seconds delta s total s
[2021-10-01T 14 0 39,870 0 0,000 0,000 CMD <:GR#> "
[2021-10-01T 14 0 39,887 1,887 1,887 1,887 RES <19:29:46> "
[2021-10-01T 14 0 39,887 1,887 0,000 1,887 VAL [19.4961] "
[2021-10-01T 14 0 39,887 1,887 0,000 1,887 CMD <:GD#> "
[2021-10-01T 14 0 39,888 1,888 0,001 1,888 RES <+90*00:00> "
[2021-10-01T 14 0 39,888 1,888 0,000 1,888 VAL [90] "
[2021-10-01T 14 0 39,888 1,888 0,000 1,888 CMD <:GU#> "
[2021-10-01T 14 0 39,891 1,891 0,003 1,891 RES <nNpHEo150> "
[2021-10-01T 14 0 39,891 1,891 0,000 1,891 CMD <:Gm#> "
[2021-10-01T 14 0 44,903 6,903 5,012 6,903 CMD <:%BD#> "
[2021-10-01T 14 0 44,910 6,91 0,007 6,91 RES <0> "
[2021-10-01T 14 0 44,911 6,911 0,001 6,911 CMD <:%BR#> "
[2021-10-01T 14 0 44,920 6,92 0,009 6,92 RES <0> "
[2021-10-01T 14 0 44,921 6,921 0,001 6,921 CMD <:GX90#> "
[2021-10-01T 14 0 49,933 11,933 5,012 11,933 Guid e Rate: 1.000000 "
[2021-10-01T 14 0 49,934 11,934 0,001 11,934 CMD <:GX95#> "
[2021-10-01T 14 0 49,940 11,94 0,006 11,94 RES <0> "
[2021-10-01T 14 0 49,941 11,941 0,001 11,941 CMD <:GX96#> "
[2021-10-01T 14 0 54,946 16,946 5,005 16,946 CMD <:GXE9#> "
[2021-10-01T 14 0 54,953 16,953 0,007 16,953 RES <60> "
[2021-10-01T 14 0 54,954 16,954 0,001 16,954 CMD <:GXEA#> "
[2021-10-01T 14 0 54,962 16,962 0,008 16,962 RES <60> "
[2021-10-01T 14 0 54,962 16,962 0,000 16,962 CMD <:GX9A#> "