hi dusan!
thank you for your effort - i made a little walkthrough video - hope it helps others: Setting up a PI 4 & 5 for use with INDI yours wolfi

Nou
Would it be possible for your scripts to inform the user which version of INDI and KStars they were going to build?
Regards
TM

It’s easy to work out which are the stable versions due to the bi-monthly (every two months) releases. As the banner at the top of this page says “INDI Library v2.0.6 is Released (02 Feb 2024)” and similarly with KStars 3.6.9. Both were released at the beginning of February and Nou updated his scripts within days. We can expect Indi 2.0.7 and KStars 3.6.10 around the beginning of April.

Hi NOUCompiles ok INDI and Kstars but when you compile PHD2 it stays here, what could be happening?
Best regards

[ ! -d ../build-phd2 ] && cmake -B ../build-phd2 ../phd2 -DCMAKE_BUILD_TYPE=Release || { echo "PHD2 failed aca"; exit 1; }

Ok PHD2 portion was disabled for so long that it broke down. I added option that if you pass phd2 as argument into script it will build it. It will build older version 2.6.12 as newer require cmake 3.24 which is AFAIK not available on raspberry os.

Hi. Today I have tried to compile PHD2 unsuccessfully. Then I found the issue that is mentioned here. I am wondering if kstar compiling can be done by cmake 3.24. My O/S is Ubuntu 22.04. Do you suggest a different O/S. ?What is your environment?

I am also on Ubuntu 22.04. Try compile 2.6.12 that should work with older cmake.

Ok. Thank you. We will check with the next phd2 and kstar releases.
BTW: by Remote desktop of Windows I connect Pi. What is your solution?

Hi,

according to the documentation nou's scripts should work on any Debian-based distro. This would include Pi OS bullseye 64bit. However compilation on that distro fails repeatedly within the indi-3rdparty section at libahp-gt compilation/linking time. Error is "File format not recognized." for '/usr/lib/arm-linux-gnueabihf/libahp_gt.so' by ld. File is actually a 64bit object as expected.

Apologies for not supplying exact error messages - I am currently trying the same installation on Ubuntu 22.04 after it was mentioned within this thread and that seems to at least get over the indi-3rdparty section that breaks on Pi OS (but I would prefer to run the whole thing on Pi OS). If required I can set up the system again on a new SD card with Pi OS and supply exact info. But it can be reproduced quite easily.

Steps to reproduce: follow the installation instructions. Fresh install of Pi OS bullseye 64bit (desktop), get the scripts via git clone, run `./install-dependencies.sh` and run either "build-soft-stable.sh" or "build-soft-latest.sh" (it fails on either). Compilation runs fine till the indi-3rdparty section where the error occurs and the script stops.

Is this a known issue?
Is there anything that would need to be setup/configured/installed prior to cloing and running the scripts? I suspect that the gcc/cc/ld setup on Pi OS is different from Ubuntu which causes this issue.

Thank you for any insights,
Michael

I now exclusively use Raspberry Pi OS 64bit ‘bookworm’ on my RPi4 and RPi5. Just to say I have several microSD cards and USB drives (Samsung Fit Plus 256GB) on which nou’s scripts have worked perfectly, the latest one being yesterday (2024-02-17). I used to use bullseye but after the December updates, bookworm has been working fine.

Hello Avocette,

thank you for the information that it cmpiles on bookworm which can also be gathered by watching Wolfgang's video some postings above. My question however was whether the scripts will work on bullseye.

Regards,
Michael

Yes this is known issue. Triple check that you have indeed 64 bit system. Because /usr/lib/arm-linux-gnueabihf path indicate that you are running 32 bit system.