×

INDI Library v1.9.9 Released (30 Nov 2022)

Bi-monthly INDI Library released with new drivers and bug fixes.

Suspend guiding while focus not working

  • Posts: 94
  • Thank you received: 3
I ran into the same problem with the latest stable build (3.6.0 Stable) The guide scope appeared as primary scope but it does not suspend phd2 guiding.
2 months 3 weeks ago #86387

Please Log in or Create an account to join the conversation.

  • Posts: 25
  • Thank you received: 7
While we are on the topic of suspended guiding, is there a simple way to delay the first image of a sequence after autofocus to allow the guider to stabilize - say 10 or 15 seconds? My first image is not usable after autofocus with suspended autoguiding.
Takahashi FSQ 106EDX4
Sesto Sento 2 focuser
Paramount ME via TSX on RPi4
ZWO ASI6200 MM Pro
Chroma 3nm NB filters
Chroma LRGB filters
ZWO EFW filter wheel
Raspberry Pi 4 StellarMate OS at telescope
KStars/Ekos on linux desktop
2 months 2 weeks ago #86395

Please Log in or Create an account to join the conversation.

  • Posts: 94
  • Thank you received: 3
I believe you can set the guiding deviation under a threshold which the sequence starts (i.e: if the guiding RMS above 1 arcsec then the sequence won't start). See it in the capture tab.
2 months 2 weeks ago #86397

Please Log in or Create an account to join the conversation.

Time to create page: 0.377 seconds