Hi,
i have the problem, that when i create sequence queue for the filter wheel, it stops randomly after changing the filter. It freezes the queue and do not start the exposure for the camera.
The Progress says "Filter selcted" and the circle get green, but the job for the exposure does not start.
Sometimes it run trough the queue, but it randomly stop at a filter, but not every time.
The picuture show, the state when the queue is freezed.
Maybe someone can help me with this issue.

KStars Version is 3.6.7.

EFW: ASI EFW 36mm (indi_asi_wheel, Version 2.3)
Camera: ASI2600MM (indi_asi_ccd, Version 2.3)

When you need more information and details, please do not hesitate to contact me.

interesting, I see this last month using my qhy183 and cfw3 wheel. fiter changes during target align or focus but hangs when the sequence stars. i see that filter change hangs on the CFW3 INDI panel. I switched back to the older version on another SD Card

Alessandro, thanks that i am not alone with this issue. But i think it is not the solution to switch back to an older version.
When someone needs more information, i can give you some logs or anything what you need to find the problem.

Right but if i am out from home far away 100km for a session, I do not waste time finding a problem, i must have a quick working solution to minimize problems and wasting time.
Wheh i develop something beforse release it i try to make all the possibile tests to avoid problems

I tried to reproduce the issue using simulation mode but no such issue was found.
Can you please Attach the logs? So, we can further investigate the issue.

Hi Salman,

attached the requested logs and the picture how it interrupt the sequence.

When you need more data, do not hesitate to contact me.

I am doing some tests, but at the moment when i start a capture sequence with some filters, it hangs con filter change, i have to unplug the QHY camera and restart all the stuffs

I have no problems if I use my Kstars 3.6.6 2023-08-01


I used this image and do apt update and dist-upgrade, and now It hangs on filter change

Here the log and a screenshoot during the hangs on latest Kstars 3.6.7

I also tried with latest sdk 23.10.11 but same problem

Hi,
i have check the code a little bit, but my programming skills are not the best.
In the sequencjob.cpp in the function capture it looks like that function getActiveCamera or getActiveChip does not return the wrong, because otherwise the exposure would be started
Maybe someone with better understanding of the whole code could finde the issu

Now seems that it works, if i do updates from Kstars 3.6.6 2023-08-01 to latest 3.6.7 without the intermediate 3.6.6 of the end of August. Very strange