Hi,

I have a Stellarmate in a RPI4 connected to my setup that includes a Pegasus PPB. On Stellarmate I can select that device on Ekos profile editor.

But from windows the Ekos profile editor doesn't have the Pegasus PPB.

I checked the file C:\Program Files\KStars Desktop Planetarium\bin\data\kstars\indidrivers.xml and I found the entry for it (indi_pegasus_ppb).

Is there anything I can do to enable that device on the Auxiliary devices combo box?

Hello Manual and welcome to INDI forums. If the entry is there, it should be in the auxiliary list. If you're connecting remotely to stellarmate, you can simply just write in one of the auxiliary combo boxes "Pegasus PPB" and that would work just as well.

Don’t forget, INdI does not reside on windows, only on the SM unit, so make sure it’s attached, as you can’t run it all from windows alone... ?

Yes, I know and still, a lot to read and to try in order to use it quickly and to decide if I should use it with other software (PHD2, APT, SkyTools 4, ...) and how?

Well, really this SM software is an all in one solution, no other software is needed, as it does the lot, and does it very very well indeed.. you could use PhD2 as that intergrates with Kstars / ekos , and many people do,use it rather than the built in guide software...personally I use it all on SM and done use anything ease at all for my full imaging set up..