Hi. I have a flat panel pegasus astro flat master 150. the panel is regulable light and the module regule the photo exposure time but. I would need you to adjust the panel light. can be implemented in the flat module that do es that. It would be great for cameras with a mechanical shutter. ideas ?. thank you so much.

Manel,

I'm not quite sure what you are asking, but the Flatmaster interface in Indi supports changing the brightness, and the capture module supports changing the exposure. I just turn mine on, set the brightness and use 2 second exposures. For color filters, I adjust the brightness, but leave the exposure the same, so I don't have to make a bunch of different dark frames. My camera has a mechanical shutter.

HTH

hi. yes the indi have control brightness control. in the window control. but in the capture module there is not possibility to use this. and wen changing the filter the panel is set to maximun brightness. of the panel instead of change the exposure. this is possible ?
sorry for mi bad english.

sorry for mi bad english.
or use assigned brightness for each filter

Manel,

Your English is fine! Yes, the brightness has to be adjusted in the Indi Control Panel. You can set the offsets per filter in the Indi Control Panel. I have not done that, because I didn't know they could be set there!



I'll have to try it out.
Thanks!

hi. thanks. this part "preset "of the panel does not appear in my panel configuration, something is wrong with me, I will investigate more.

Manel,

I'm on KStars version 3.6.4 stable.

ok thanks i have the version astroberry in a pi4 4Gb . version 2.0.4. this his the problem . thanks i wait the nex version or buy an new system for my 's telescopes. a lot of thanks