I have upgrade Stellarmate from 1.7.2.to 1.7.3. It is found when click Capturing Image button or loop capture image button in Focusing module, the whole Kstar and EKOS will clash. Then it is reloaded. It is found EKOS and Kstar will clash when Filter Wheel option set to nil "--" in "Optical Train". Also, it is found the "Gain" in Ekos module cannot set to nil "--" that affect the INDI Control Panel camera setting when shooting image. It is impossible to run complete process. I need to reinstall back to 1.7.2 version. Please help.

Read More...

Kenny Wong replied to the topic 'CEM40 usb drops connection' in the forum. 8 months ago

What power source you power up raspberry pi4? Pi4 is power hunger. It may not have sufficient to power USB device plugged in. You can add a active USB hub in between Pi4 and CEM40.

Kenny

Read More...

Kenny Wong replied to the topic 'ioptron CEM 40' in the forum. 10 months ago

Hi Roy,

Most FT232 USB-to-serial chips support baud rate 9600 only. Too fast may cause trouble to connection.

Read More...

Kenny Wong replied to the topic 'Beta OS 1.5.5 update issues' in the forum. 2 years ago

You are not alone. I have same symptom as you Kstar boot loop. I restore to last backup before update and look for solution.

Read More...

Kenny Wong replied to the topic 'QHY268C does not work' in the forum. 2 years ago

I also have QHY268C(PhotoGraphic Version) and installed with Stellarmate on RPI4B.
I have trouble with QHYCCD SDK ver.20.07.26 before. It is fixed with Stellarmate Beta nighly build with QHYCCD SDK ver. 20.08.26
Please check with QHYCCD SDK version in INDI QHYCCD panel.

Read More...