Hi All

After updating to Indi v2.0.1 I am running into some problems with the indi_celestron_gps driver. Basically with v2.0.1 my mount (Celestron AVX, connected via hand controller USB) becomes unable to sync to astrometric solution coordinates and becomes unresponsive to slew commands. Tracking, as well as moving the mount with the ECOS mount control buttons still works.

In the ECOS alignment tab, the 'Sync' option is not available (grayed out). The 'Slew to target' option still is but fails to align the mount to a given target: When trying to slew and align to an existing target from the KStars catalog (a I forgot what it was, M87 maybe - something reasonable close to where my telescope was already pointing at for polar alignment close to meridian and celestial equator), the solver successfully determined the current pointing position and initiated a slew to get closer to target, but then the mount wouldn't move away from it's current pointing position, reiterating the capture and slew sequence over and over again.

Also, slewing from within PHD2's Drift alignment tool wouldn't move the mount but instead just immediately crash/close PHD2.

My setup uses a raspberry pi4 with Bullseye 64bit to connect the mount and the main camera and I am compiling Indi and ECOS (v3.6.4 stable) from source. Once I recompile Indi to v1.9.9 everything works normal again.

Has anyone else come across a similar problem?

Thanks
Niels

Read More...