Thank you for the response!

Today I have performed a simple test.
- I connected to the mount and unparked it.
- I slewed to the Saturn (far after transit). It works ok. The side of the pier was correct: east pointing west.
- I slewed to Pleyades (far before transit which is around 3 AM in my timezone). It works ok. The side of the pier was updated correctly to west pointing east. 
- I slewed to Andromeda Galaxy (transit in about 4 hours, around the midnight). The scope shouldn't change the side of the pier but it did. As I wrote before the meridian flip is scheduled after more than 12 hours (attached image), which indicates that the mount knows that it is on the wrong side of pier.
By the way I was unable to set the debug on - the driver instantly turned it of. The same behaviour was under AP GTOCP2 driver. Here is the log copied from the indi console:


2021-10-12T19:09:42: [INFO] Debug is disabled. 
2021-10-12T19:09:42: [INFO] Debug is enabled. 
2021-10-12T19:09:26: [ERROR] Error reading from device Timeout error (-4) 
2021-10-12T19:09:13: [ERROR] Error reading from device Timeout error (-4) 
2021-10-12T19:08:32: [ERROR] Error reading from device Timeout error (-4) 
2021-10-12T19:06:43: [ERROR] Error reading from device Timeout error (-4) 
2021-10-12T19:06:39: [ERROR] Error reading from device Timeout error (-4) 
2021-10-12T19:05:44: [INFO] Slew is complete. Tracking... 
2021-10-12T19:05:38: [ERROR] Error reading from device Timeout error (-4) 
2021-10-12T19:04:49: [INFO] Slewing to RA: 0:43:56 - DEC: 41:23:20 
2021-10-12T19:04:24: [INFO] Slew is complete. Tracking... 
2021-10-12T19:03:13: [INFO] Slewing to RA: 3:47:37 - DEC: 24:00:55 
2021-10-12T19:01:42: [INFO] Slew is complete. Tracking... 
2021-10-12T19:01:25: [ERROR] Error reading from device Timeout error (-4) 
2021-10-12T19:01:17: [ERROR] Error reading from device Timeout error (-4) 
2021-10-12T19:00:56: [INFO] Slewing to RA: 20:37:58 - DEC: -19:20:31 
2021-10-12T19:00:48: [ERROR] Error reading from device Timeout error (-4) 
2021-10-12T19:00:36: [ERROR] Error reading from device Timeout error (-4) 
2021-10-12T19:00:30: [INFO] Debug is disabled. 
2021-10-12T19:00:30: [INFO] Debug is enabled. 
2021-10-12T19:00:28: [INFO] Debug is disabled. 
2021-10-12T19:00:28: [INFO] Debug is enabled. 
2021-10-12T19:00:27: [INFO] Debug is disabled. 
2021-10-12T19:00:27: [INFO] Debug is enabled. 
2021-10-12T19:00:16: [INFO] Parking/Unparking aborted. 
2021-10-12T19:00:04: [INFO] Parking is in progress... 
2021-10-12T18:59:59: [INFO] Mount is unparked. 
2021-10-12T18:59:59: [INFO] Mount is unparked. 
2021-10-12T18:59:54: [WARNING] You must initialize the mount before parking. 
2021-10-12T18:59:50: [INFO] Telescope already unparked. 
2021-10-12T18:59:46: [WARNING] You must initialize the mount before parking. 
2021-10-12T18:59:31: [INFO] Time updated. 
2021-10-12T18:59:17: [INFO] Device configuration applied. 
2021-10-12T18:59:17: [INFO] Pulse guiding is enabled. 
2021-10-12T18:59:17: [INFO] Observer location updated: Latitude 50:02:21.4 (50.04) Longitude 19:55:36.3 (19.93) 
2021-10-12T18:59:17: [INFO] Site location updated to Lat 50:02:21 - Long 19:55:36 
2021-10-12T18:59:17: [INFO] Dome Policy set to: Dome ignored. Mount can park or unpark regardless of dome parking state. 
2021-10-12T18:59:17: [INFO] Loading device configuration... 
2021-10-12T18:59:17: [INFO] Please initialize the mount before issuing any command. 
2021-10-12T18:59:17: [INFO] AstroPhysics is online. 
 

Read More...