×

INDI Library v1.9.8 Released (29 Sep 2022)

Bi-monthly INDI Library released with new drivers and bug fixes.

Kstars

  • Posts: 6
  • Thank you received: 0

Kstars was created by Ian Danks

@Ian
. I have a small problem with Kstars , I have the telescope connected to Kstars I pick a object in Kstars I then tell the scope to go to to the objects, the the telescope move’s to the spot I have picked but the icon on Kstars stays in the one spot .What have I not connected. I am using a Celestron evaluation 6”.
Last edit: 2 months 1 week ago by Ian Danks. Reason: change the heading
2 months 2 weeks ago #86332

Please Log in or Create an account to join the conversation.

  • Posts: 277
  • Thank you received: 33

Replied by wotalota on topic Kstars

Is the mount tracking, if not try enabling tracking. In the attached, used KStars to unpark and then move the mount away from the meridian.
Mach1, TS86SDQ, ASI071, ASI174, OAG, focusPro
2 months 2 weeks ago #86339
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 6
  • Thank you received: 0

Replied by Ian Danks on topic Kstars

yes but i don't have that square around my goto object also were the telescope indicated is not on the map, when I get home I will send you a screen shot
2 months 2 weeks ago #86347

Please Log in or Create an account to join the conversation.

  • Posts: 277
  • Thank you received: 33

Replied by wotalota on topic Kstars

The square(s) come from defining fields of view FOV in KStars. I tested and the red telescope position comes from setting KStar > Settings > INDI > Telescope crosshair check box.
Mach1, TS86SDQ, ASI071, ASI174, OAG, focusPro
2 months 2 weeks ago #86349

Please Log in or Create an account to join the conversation.

  • Posts: 6
  • Thank you received: 0

Replied by Ian Danks on topic Kstars

Thanks mate for the help I am new to astroberry so I am still learning .I went to Sydney today and only just got home I will send you a screen print tomorrow
2 months 2 weeks ago #86361

Please Log in or Create an account to join the conversation.

  • Posts: 6
  • Thank you received: 0

Replied by Ian Danks on topic Kstars

Hi wotalota I finely got that screen print for you to have a look , as you can that is wear the scope is and will not move ,hope you can help
2 months 2 weeks ago #86434
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 277
  • Thank you received: 33

Replied by wotalota on topic Kstars

Ian,
I don't think I can be much help, not being familiar with Astroberry. As author Is there a way to change the heading of the post to see if someone who recognises the problem sees it? Or does astroberry have a different forum?
Tom
Mach1, TS86SDQ, ASI071, ASI174, OAG, focusPro
2 months 2 weeks ago #86439

Please Log in or Create an account to join the conversation.

  • Posts: 376
  • Thank you received: 55

Replied by Jerry Black on topic Kstars

Could you try clicking on the sync button in the Celestron telescope control window that watalota showed? That may force the mount to pick up the coordinates that it moved to.
120 MM Skywatcher Esprit + Celestron CGX, ZWO ASI 224MC guiding, Pegasus FocusCube+PPBA
Nikon Z7 8256 x 5504 4.34 um. Triad Ultra Quad NB Filter
1) MeLE Quieter3C 8G Ubuntu-mate 22.04.1 2) Odroid-N2. 3) StellarMate RPI4 8G
The good, the bad, the ugly at sciencedowneast.no-ip.ca/zenphoto/
2 months 2 weeks ago #86440

Please Log in or Create an account to join the conversation.

  • Posts: 6
  • Thank you received: 0

Replied by Ian Danks on topic Kstars

Thanks Jerry I've already tried that ,I think I may have the wrong telescope driver
2 months 1 week ago #86464

Please Log in or Create an account to join the conversation.

Moderators: Radek Kaczorek
Time to create page: 0.612 seconds