I am trying to get a Svbony sv305m to connect to kstars. The installed software is listed below.
I can start kstars and ekos. I configured ekos with the mount simulator and svbony ccd camera. (the dropdown choices are ccd and sv205)
Is the stack below correct? Am I missing some drivers? Am I missing a configuration step?
lsusb shows:
Bus 002 Device 006: ID f266:9a0a SVBONY SVBONY SV305PRO
The error message shows unable to open /dev/video0 no device (how is video 0 created? is it part of the driver or is it part of the linus config?

libsvbony-2.0.1.git-20230316100132.fc36.x86_64
w3m-0.5.3-60.git20230121.fc36.x86_64
indi-libs-2.0.1.git-20230322062913.fc36.x86_64
kstars-debugsource-3.6.4.git-20230324134513.fc36.x86_64
kstars-debuginfo-3.6.4.git-20230324134513.fc36.x86_64
libahp-gt-2.0.1.git-20230326055333.fc36.x86_64
indi-eqmod-2.0.1.git-20230326060048.fc36.x86_64
stellarsolver-2.4.git-20230201164850.fc36.x86_64
indi-2.0.1.git-20230322062913.fc36.x86_64
kstars-3.6.4.git-20230326171946.fc36.x86_64
indi-gphoto-debugsource-2.0.1.git-20230326060259.fc36.x86_64
indi-gphoto-debuginfo-2.0.1.git-20230326060259.fc36.x86_64
indi-gphoto-2.0.1.git-20230326060259.fc36.x86_64

I was running Fedora 36. I upgraded to FC37 and tried with the stock packages. That identiried a svbony 305 option but failed to find the driver. Posts indicated it was provided by the 3rdparty repository.
I re-enabled those repositories, unloaded the stock kstars, indi packages, and installed the 3rdparty repository packages.
The result was the same - ekos failed to start 'indi driver failed to start ...' I am coming to the conclusion it may actually be the device. I have a few days in the window to return it. If magic does not occur I will go down that path.

Did you try to start the indiserver and driver from the command line e.g. "indiserver -vv indi-sv305"?
There is an other topic on INDI Driver for SVBONY cameras, may be it could help
indilib.org/forum/wish-list/6373-indi-dr...html?start=180#62323